Examples of 'upper knife' in a sentence
Meaning of "upper knife"
This phrase is not commonly used in English. It is possible that it is a misspelling or a slang term specific to a certain area or community. Without further context, it is difficult to provide a specific definition
How to use "upper knife" in a sentence
Basic
Advanced
upper knife
Lower or upper knife is blunt or wrongly positioned.
Adjust overedge width by moving upper knife.
The position of the upper knife is not adjusted properly.
Adjust the vertical position of the upper knife.
Turn the upper knife release knob toward you.
Adjustment is made by moving the upper knife up or down.
Lower the upper knife to its lowest point and loosen.
Remove the hexagonal bolt and the upper knife.
Insert new upper knife into the groove of the knife.
Turn the handwheel to check if the upper knife is activated.
Turn the upper knife release knob away from you.
Turn the handwheel to check if the upper knife is deactivated.
Replace the upper knife only when the knife blade tip is damaged.
A special knife grinder is needed to resharpen the upper knife.
Turn the handwheel until the upper knife is fully raised.
See also
The upper knife q will now operate simultaneously with the operation of the machine.
Turn the pulley and set the upper knife to the down position.
Set the upper knife lightly on the lower knife and tighten set screw e.
Turn the machine pulley until the upper knife holder is at its lowest position.
Upper knife vertical position adjustment 1.
You may use a vacuum cleaner to clean the upper knife area or feed dog.
Make sure that the upper knife is lowered in the cutting position.
Adjust the left-right position of the upper knife.
Insert new upper knife into the groove of the knife holder and stopper pin.
The bottom knife is fixed and the upper knife works against the fixed one.
To increase operation efficiency, always prepare a spare upper knife.
Then check to make sure that the upper knife tightly touches the lower knife.
Tighten setscrew 5 when the lower knife comes in contact with the upper knife.
Turn the handwheel toward you until the upper knife reaches its highest position.
Raising the upper knife Be sure to turn the power switch OFF.
Turn the handwheel toward you until the upper knife reaches its lowest position.
To stop the upper knife q, raise the upper knife set lever w.
The apparatus 1 comprises first means 2 which consist of a lower knife 3 and an upper knife 4.
Install the Lower and Upper Knife Assemblies as shown by the label on the KutLett.
Loosen setscrew 6 and move upper knife 3 as.
To operate the upper knife q, lower the upper knife set lever w.
When threading is complete, lower the upper knife and close the looper cover.
The upper knife ( moving knife ) is made from special hardened material.
Loosen the screw y, and then move the upper knife w forward or back to adjust.
Preferably, only the upper knife 6 is rotated whereas the lower knife 5 is held fixed.
Note, After you finish sewing, return the upper knife to the original position.
Activate the upper knife refer to page 38.
Set the lower knife lightly on the upper knife and temporarily tighten set screw 0.
After removing and re-installing the upper knife, adjust the upper knife as described on page 51.
Deactivate the upper knife refer to page 38.
Loosen the screw! 3, and move the upper knife! 4 according to the cutting width.
You'll also be interested in:
Examples of using Knife
Show more
That knife he pulled on me did not look so harmless
You just brought a knife to a gun fight
The knife is old and could be dirty
Examples of using Upper
Show more
Put the upper plate on the stove
Put light items in the upper basket
The upper section has an internal tongue
