Examples of 'upper mold' in a sentence
Meaning of "upper mold"
upper mold: This phrase can refer to the top part of a mold or template used in manufacturing or shaping objects. It signifies the portion that creates the uppermost shape or outline of a product
How to use "upper mold" in a sentence
Basic
Advanced
upper mold
Replacement of the upper mold alone is also possible.
Upper mold clamping device.
The shell material is added to the upper mold cavity.
The upper mold support actuator is defined by a tube assembly.
Molds consisted of a convex upper mold and a concave lower mold.
An elastic pressure layer is located above the upper mold layer.
An upper mold.
A second actuator of the system moves the upper mold upwardly and downwardly.
The unperforated upper mold is smaller in dimensions than the glass sheet.
Thus a protective air cushion is formed between the upper mold and glass sheet.
In this way the upper mold with a molding flask can be molded.
There would be no need to use the upper mold 4.
The upper mold is thus modified then with a simple adjustment in minimum time.
A complementary portion of the upper mold part would form the upper part of each rib.
Pressing is performed with the descent of the upper mold 9.
See also
A blank upper mold assembly portion is mated with the lower mold assembly portion.
Device according to claim 1, wherein said upper mold is comprised of refractory steel.
The upper mold tool UD was moved down.
First, a press die composed of a lower mold and an upper mold is used.
The requirement to lift and lower the upper mold results in a complex overall apparatus construction.
An upper mold 2 which may have embosses on its inner wall is lowered.
Here, the electroforming mold is configured with an upper mold and a lower mold.
The function of the upper mold 4 will be explained further later on.
In a next step, the shell is positioned between a lower mold and an upper mold.
At this time, the upper mold is approached to the lower mold.
These passages, as shown, go directly through the wall of the upper mold block section.
With such a system, the upper mold alone can be replaced in only five minutes.
In the conventional method, cloth parts are clamped between the upper mold and lower mold.
Then, the upper mold members are shifted to vary the widthwise dimension of the mold.
The lower retainer, center mold assembly and upper mold assembly are described below.
The upper mold portion of the mold as illustrated in Fig . 1 can be similarly produced.
The molded article is attracted in vacuum into the upper mold portion 2a and hung therefrom.
The upper mold 1 was further lowered.
The metallic mold 2 forms a cavity C by clamping an upper mold and a lower mold.
Then, the upper mold was lowered.
The cavity clearance ( t ) can be freely set by vertically moving the upper mold 1.
Fixing the ball stud into an upper mold and a lower mold and closing the molds ;.
The upper mold 11 is supported so as to freely rotate about a vertical axis.
Relative dimensions of box, upper mold and volume of glass,.
An upper mold 12 is placed against the socket and around the commutator.
System according to claim 4, wherein the upper mold presents a transverse counter-contour.
This upper mold 7 is paired with a lower mold 20 to form a casting mold.
Usually, the mold has two parts, an upper mold and a lower mold.
Thereafter, the upper mold was again lowered at a rate of 5 mm / sec.
The fully coated compressed dosage form is retained in the upper mold assembly 214.
Then, the upper mold section 22 is moved upward and out of the way.
The molds were pressed and cooled for 40 seconds and the upper mold 1 was lifted up.
Another upper mold 105 can be positioned adjacent the exoskeleton and base material / sheet.
Thus the completed dosage forms remain seated or held in the upper mold assembly 230.
A secondary upper mold 2 secondary vacuum 3 delay vacuum 4 vibration Tuomo.
