Examples of 'upper shaft' in a sentence
Meaning of "upper shaft"
The 'upper shaft' refers to the higher or upper portion of a long, cylindrical object, such as a pole, column, or tunnel. It indicates the vertical section above a certain point, usually contrasted with the lower or bottom section
How to use "upper shaft" in a sentence
Basic
Advanced
upper shaft
While firmly holding the upper shaft.
Turn the upper shaft pulley and check the condition of the lower thread.
Align the pin into upper shaft slot.
Ensure that the key stop on the mid shaft is aligned to the upper shaft.
Attach the middle shaft to the upper shaft in the same way.
The upper shaft unit and the pressing handle abuts against the upper shaft unit.
Install the front handle onto the upper shaft.
A portion of the lower shaft and the upper shaft are enclosed in a shaft enclosure.
Place the armrest onto the top of the upper shaft.
Place the handle along the upper shaft to a position that allows for comfortable operation.
Follow these steps to connect the attachment to the upper shaft.
Slide the control box further along the upper shaft until it locks into place.
Follow these steps to remove the attachment from the upper shaft.
Slide the lower shaft into the upper shaft until the pin reaches an adjustment hole.
Slide the control box partly onto the upper shaft.
See also
Second shoulder has a diameter greater than upper shaft but less than the diameter of shoulder.
Align the button with the guide recess on the upper shaft.
Figure 7 shows an upper shaft of the present invention.
Attach handlebar above arrow on safety label on the upper shaft engine end of unit.
Screw the upper shaft tight to the spacer bracket with 2 screws.
Place the front handle along the upper shaft to a posi.
While firmly holding the upper shaft housing, pull the attachment straight out of the coupler.
Slide the attachment shaft into the upper shaft until the.
The upper shaft 62 is made flexible in such a case.
The crossarm is fastened to the lower and upper shaft by two bronze dowels.
Turn the upper shaft pulley ( 2 ) to set the needle to its lowest position.
The mid shaft can only be inserted into the upper shaft in one orientation.
Push the upper shaft 4 and lower shaft 5 together until a click can be heard.
Fitting the loop handle S Position the handle on the upper shaft.
While firmly holding the upper shaft housing, pull the.
The central connection portion constitutes anchorage means for the upper shaft 34.
While firmly holding the upper shaft housing, pull the cutting.
Figure 6 shows a retaining bolt aperture formed in the upper shaft module.
While firmly holding the upper shaft housing, pull the attachment.
The movable structure comprises an upper support housing 27 which retains and protects the upper shaft 26.
Release the camlock lever to adjust the upper shaft to desired length, for your height.
A transversal upper shaft 19 transmits the rotary motion from one column 2 to the other.
Insert the screw through the stand, upper shaft and armrest.
In a side view, the upper shaft A extends so as to intersect with the steering shaft 60.
Figure 4 is an illustration showing a control means and an upper shaft of the present invention.
The upper shaft 31 is supported by one or more bearings 5.
Figure 45 shows a view of upper shaft rollers without belts thereon.
A steering wheel 9 is connected to the upper shaft 31.
Upper beam 15 defines an upper shaft 16 which terminates in a rounded end portion.
Removing the attachment from the upper shaft Fig . 3.
The upper shaft 322 has a lower end and a lower end surface.
This shaft 3 is substantially vertical and has an upper shaft stop 9 and a lower shaft stop 10.
Upper beam 15 further defines an upwardly extending upper shaft 16.
The cushion member 33 is mounted to the upper shaft unit 32 and has two ends.
An upper rotor 21 is mounted in cantilever fashion on the upper shaft 14.
