Examples of 'use a torque' in a sentence
Meaning of "use a torque"
use a torque - It means to apply a twisting force to tighten or loosen a fastener such as a bolt or a screw
How to use "use a torque" in a sentence
Basic
Advanced
use a torque
Use a torque wrench to set the torque.
I was unable to use a torque wrench as well.
Use a torque wrench and a specified torque.
Torque wrench settings Use a torque wrench.
Always use a torque wrench to set torque.
Bronze bushing rocker shaft Use a torque wrench.
Use a torque wrench with an extension bar.
For tightening, use a torque wrench or spanner.
Use a torque wrench to check that the tightening torques are observed.
After driving, always use a torque wrench to torque your fasteners.
Use a torque wrench to tighten parts when specified tightening torques is required.
In a variant, it is possible to use a torque wrench for obtaining an equivalent result.
Use a torque wrench to torque the nut after using the air ratchet.
To prevent overtightening and / or overclamping, an operator may use a torque wrench.
How to use a torque wrench.
See also
For example, a controller for an adaptive electric motor may use a torque tracking control scheme.
Always use a torque wrench during final suspension assembly.
Maintain the tools. Change the insert clamping screw regularly. Use a torque wrench.
Use a torque wrench to check that the bolt has been tightened with the appropriate torque.
Attention, when using impact wrenches always use a torque limiter, then finish installation with torque wrench.
Use a torque wrench to tighten the connection and do not exceed a torque of 40 Nm.
You know how to use a torque wrench?
Use a torque wrench for this, tightening up ‘by feel' will not give.
Note to self: always use a torque wrench.
After that, use a torque wrench to tighten the connection.
When fitting anti-tip tubes, use a torque of 7 Nm.
For tightening, use a torque wrench or spanner and use the same.
Use a torque setting of 75 in-lbs . when adjusting the casters.
When connecting cables to the terminals, use a torque wrench to tighten the terminals to 270 lbs . / in.
Use a torque wrench to tighten the terminals to 270 lbs / inch.
Note, You must use a torque wrench to properly tighten your lug nuts.
Use a torque setting of 75 in-lbs . when adjusting the caster forks.
Why should you use a torque wrench? - Chicago Pneumatic United Kingdom.
Use a torque wrench to tighten the blade bolt to 82 N-m.
Unless otherwise noted, use a torque setting of 6.8 Nm when setting up this wheelchair.
Use a torque of 10 Nm to tighten the hexagonal head screws 6.
For tightening use a torque wrench or spanner, and use the same tightening torque.
Use a torque driver to install the Venturi Cartridge to a torque of 10 to 15 inchpounds.
You'll also be interested in:
Examples of using Use
Show more
Use this machine with long trousers
Description of method of use with practical example
Do not use the instrument to heat inflammable
Examples of using Torque
Show more
The resulting torque introduces the rotation
Torque for terminal box cover screws
Low level inducement torque reduction scheme
