Examples of 'use a wrench' in a sentence
Meaning of "use a wrench"
use a wrench: This phrase means to utilize a tool, specifically a wrench, for tightening or loosening nuts, bolts, or other fasteners
How to use "use a wrench" in a sentence
Basic
Advanced
use a wrench
Never use a wrench on the piston itself.
He has even learned how to use a wrench.
Do not use a wrench to tighten the nut.
I have seen you use a wrench.
Use a wrench and not an electric screwdriver.
Looking for a place to use a wrench.
Do not use a wrench to tighten the chuck.
Depress spindle lock button and use a wrench on the.
Do not use a wrench to tighten the connection.
Depress the spindle lock button and use a wrench to tighten the.
Only use a wrench on the lower nut.
Depress spindle lock button and use a wrench on the hub of the.
Use a wrench to turn the leveling feet.
Take off the die holder and use a wrench to remove the screw.
Use a wrench to loosen blade fastening screws.
See also
Depress the spindle lock button and use a wrench to tighten the hub of the wheel.
Never use a wrench when tightening the nuts.
I think I saw a hydrant on the corner and now I know how to use a wrench.
Use a wrench to firmly tighten the side handle.
If range height adjustment is necessary, use a wrench or.
Use a wrench to remove the orifice.
If you are unable to loosen it by hand, use a wrench.
Use a wrench to remove the sear burner orifice brass.
To secure it properly, you can also use a wrench.
Use a wrench to tighten the hose to the brass fitting.
Depress the spindle lock button 3 and use a wrench to.
Do not use a wrench to tighten or loosen the chuck jaws.
If range height adjustment is necessary, use a wrench or pliers to loosen the 4 leveling legs.
Use a wrench on the square end of the water heater control.
When carrying out the connections, use a wrench to counterhold at the transitions.
Use a wrench to relax bolts on either side from the cover.
Once the bracket screws are loosened, use a wrench to rotate the cams to make adjustments.
Then use a wrench to loosen and remove the cables from the terminals.
For example, you may struggle to use a wrench or write something down with a pen.
Use a wrench to loosen and remove the connector from the feed tube.
When making the connections to the heat pump, use a wrench to counterhold at the transitions.
Then use a wrench as a hammer.
The nuts are self locking, but you must use a wrench to tighten them completely.
Use a wrench to finish turning the legs until the diamond marking is no longer visible.
Prepare the elbow connection, First use a wrench to loosen the manifold female.
Never use a wrench or means other than a chuck key to tighten or loosen the chuck.
Tighten all hose nuts by hand . Never use a wrench when tightening the nuts.
ALWAYS use a wrench to tighten rotor nut.
Eric do not . I have seen you use a wrench.
CAUTION Use a wrench to tighten the washer nut.
Well, I guess you do know how to use a wrench.
I knew how to use a wrench before I couLd pick up a fork.
The one in the bathroom works . I use a wrench.
Use a wrench to tighten, but do not overtighten.
IMPORTaNT, Never use a wrench on the piston itself.
You'll also be interested in:
Examples of using Use
Show more
Use this machine with long trousers
Description of method of use with practical example
Do not use the instrument to heat inflammable
Examples of using Wrench
Show more
Blade wrench is stored in the switch handle
The day threw a wrench in our plans
Hex wrench for loosening control knobs
