Examples of 'using a rotary evaporator' in a sentence
Meaning of "using a rotary evaporator"
using a rotary evaporator: This phrase describes the action of employing a laboratory instrument called a rotary evaporator. It is used in chemistry to separate and purify liquid mixtures by evaporation. The instrument rotates the sample under reduced pressure, allowing for the collection of condensed vapor
How to use "using a rotary evaporator" in a sentence
Basic
Advanced
using a rotary evaporator
The solvent is removed using a rotary evaporator.
Using a rotary evaporator.
The solvent was removed using a rotary evaporator.
By using a rotary evaporator the solvents were removed at reduced pressure ( water bath 40 °C ).
The hexane was removed using a rotary evaporator.
Remove residual trifluoroacetic acid by coevaporation with carbon tetrachloride and toluene using a rotary evaporator.
Solvent was removed using a rotary evaporator as previously described.
The solution was evaporated to dryness using a rotary evaporator.
Liposomes were synthesized by using a rotary evaporator and subsequently the enzyme was immobilized.
The reaction mixture was concentrated using a rotary evaporator.
The solvent was removed using a rotary evaporator until the product was a loose solid.
The reaction mixture is evaporated using a rotary evaporator.
Concentration is carried out using a rotary evaporator and the crude product is recrystallised from toluene.
The solvent was removed by evaporation using a rotary evaporator.
The filtrate is concentrated using a rotary evaporator to yield a solid that is triturated in ether.
See also
All volatiles were evaporated in vacuo using a rotary evaporator.
The methyl alcohol was removed using a rotary evaporator and the residue extracted with ethyl acetate.
The mixture is concentrated to dryness using a rotary evaporator.
The solution was concentrated using a rotary evaporator to provide wet Raltegravir potassium crystalline Form V.
The toluene was removed by stripping using a rotary evaporator.
The ethanol was removed using a rotary evaporator and ethyl acetate / water were added.
The product was stripped of toluene using a rotary evaporator.
The filtrate was concentrated using a rotary evaporator to leave the desired hydroxy-functional fluorinated acrylamide.
Distillation is then carried out using a rotary evaporator.
The solvent was removed using a rotary evaporator to give 187.2 g of a crude viscous yellow oil.
The methanol is evaporated off using a rotary evaporator.
The acetone is removed using a rotary evaporator ( the bath temperature should not exceed 35 °C ).
The remaining solvent was stripped using a rotary evaporator.
The polymer was dried using a rotary evaporator while heating the flask at 70°C.
The resulting mixture was concentrated using a rotary evaporator.
Furthermore, ethanol was removed using a rotary evaporator at 30 °C, and the residue was quantified gravimetrically.
The organic phase obtained was evaporated using a rotary evaporator.
This may be carried out using a rotary evaporator or a fractionating column.
The heptane is selectively evaporated off using a rotary evaporator.
The toluene was removed using a rotary evaporator leaving a dark brown oil.
A thin film was generated by evaporation of dichloromethane using a rotary evaporator.
All volatiles were in vacuo using a rotary evaporator to yield a yellow oil.
Evaporations were carried out under reduced pressure using a rotary evaporator.
All solvents were removed using a rotary evaporator to give a brown sticky liquid.
The remainder of the solvent was removed using a rotary evaporator.
The eluent was concentrated using a rotary evaporator to give 8 mg of the desired product.
The filtrate was evaporated under vacuum using a rotary evaporator.
The eluent was concentrated using a rotary evaporator to give 37 mg of the 2-cyanophenylsulfide TFA salt.
The mother liquor is concentrated using a rotary evaporator.
The water was removed using a rotary evaporator and the catalyst dried at 110°C for 2 hours.
The solution was concentrated using a rotary evaporator.
Concentration or evaporation of the solvent under reduced pressure was done using a rotary evaporator.
The miscella was desolventized using a rotary evaporator leaving crude oil.
The reaction mixture was then concentrated by removing the solvent using a rotary evaporator.
The reaction was concentrated using a rotary evaporator to get a solid residue.
You'll also be interested in:
Examples of using Evaporator
Show more
Punctured evaporator that voids the warranty
Determination of the individual capacity of each evaporator
Each evaporator shall be tested on a separate calorimeter
Examples of using Rotary
Show more
Rotary switch for choice of battery type
Set the middle rotary switch to min
Rotary encoder with mounted stator coupling
Examples of using Using
Show more
Mash kidney beans using a potato masher
Log in using the default administrative account
Proportion of households using a clean water source
