Examples of 'using a wire' in a sentence
Meaning of "using a wire"
using a wire: This phrase typically refers to the act of utilizing a physical wire, often in the context of technology or electrical systems. It suggests the use of a physical wire for connecting, transmitting, or conducting electrical signals or data
How to use "using a wire" in a sentence
Basic
Advanced
using a wire
Clean the piston using a wire brush.
Using a wire electrode increases sensitivity of the capacitor.
Gently clean using a wire brush.
The scanner is connected to the portable control terminal using a wire.
I think they are using a wire to pull his lips up.
Then hang them in your trees using a wire.
Withdrawing using a wire transfer will result in the player being charged processing fees.
Clean the spark plug using a wire brush.
Sometimes the battery and controller are external to be connected to the vibrator using a wire.
Brush the weld clean using a wire brush.
Processes using a wire and mandrel and a plain cylindrical tube also produce uniform products.
Carefully clean the electrodes using a wire brush.
This is typically done using a wire weld process that applies significant heat to the parts.
Carefully clean spark plug using a wire brush.
Using a wire brush, remove any dirt and debris that.
See also
Of the company is considering using a wire transfer instead.
Connect the cooktop ground conductor lead to the brach circuit ground using a wire nut.
Clean by scraping or washing using a wire brush and commercial solvent.
Scrape any build up off the heat tents using a wire.
Clean the ignitor clip lightly using a wire brush to remove rust and grease.
Connect the green wire to the ground wire using a wire nut.
Pull out the suction head by using a wire hook through the tank opening.
Check the spark plug and clean if necessary using a wire brush.
The orange juice was filtered using a wire mesh strainer typically found in the kitchen.
The gobo is fixed in the holder using a wire clip.
In my experience, using a wire mesh wherever possible has been most effective.
The laminate sheet may be made using a wire mesh.
Using a wire hook, take out the filter from the filler.
Check the spark plug gap using a wire feeler gauge.
Connect the house supply ground wire to the fixture ground wire using a wire nut.
The powder is electrostatically charged using a wire grid positioned inside the coating chamber.
The recording wire is later shown being played in an office using a wire player.
The solid was stirred with hexanes using a wire stir blade to powderize the solid.
Remove the carbon deposits on the muffler screen and spark arrester using a wire brush.
Using a wire with a hook, we became experts at catching a chicken by the leg.
Remove the spark arrestor and gently clean using a wire brush.
When using a wire cup brush or wire wheel, avoid applying excess pressure.
Pull out the spark arrestor screen and clean using a wire brush.
Using a wire hook, take out the filter from the filter port.
You could leave the wires for a few months and remove them using a wire cutter.
Using a wire hook, gently pull the fuel filter out through the fuel filler opening.
Connect the white wire to NEUTRAL using a wire nut.
Using a wire brush or flat-head screwdriver, scrape off any build-up or debris.
Connect the black wire to HOT using a wire nut.
When using a wire wheel brush, install guard according to " Installing / Removing Accessories.
Connect the green wire to the earth ground rod and AC ground using a wire nut.
You should clean the battery terminals using a wire brush after every 6 to 8 months.
Connect the fixture ground wire and the supply ground wire together using a wire nut BB.
Insert the LED into the rudder, using a wire to press it into position.
If spark plug is in good condition, clean plug by scraping or using a wire brush.
You'll also be interested in:
Examples of using Using
Show more
Mash kidney beans using a potato masher
Log in using the default administrative account
Proportion of households using a clean water source
Examples of using Wire
Show more
Steel wire liners can be coated or noncoated
Use a passage aid wire or previous cord
Cut wire liner at the right length
