Examples of 'using the knob' in a sentence
Meaning of "using the knob"
using the knob - Refers to operating a device or tool with a knob, such as adjusting settings or controls by turning a knob
How to use "using the knob" in a sentence
Basic
Advanced
using the knob
Program the time using the knob.
By using the knob 5.
Start the rotisserie using the knob to select.
Make sure your hands are completely dry before using the knob.
Set the temperature using the knob on the front cover.
Adjust the heat setting of the elements using the knob.
Set the delivery volume using the knob on the top of the pipette.
Reduce the volume you have selected using the knob.
Set the required current intensity using the knob on the front of the welding appliance.
You can set the temperature to any level using the knob.
Start the rotisserie using the knob to select MODE or.
Attach the bracket to the left side of the planer using the knob bolt.
Just easily switch steps using the knob on the side of the Knops.
Set the temperature of the selected heating plate or both plates using the knob.
Maximum output can be set using the knob if desired.
See also
The fight came when clients pushed the door with fingers instead of using the knob.
Please set the desired temperature using the knob on the front cover.
Press - Select the intensity of the sound on a scale of 12 to 62 by using the knob.
The electrical adjustment is carried out using the knob on the controller and the joystick.
Lock the moving head on the front part of the rail using the knob 5.
Set the temperature on the aquastat using the knob graduated in degrees Celsius and Fahrenheit.
Adjust the wire speed and the welding voltage using the knob AI.
Adjust the Downforce, using the knob ( 6 ), to the cartridge manufacturer 's recommendations.
Select the desired value using the knob.
Select the operating mode using the knob O, keeping in.
Set the desired pre-cooling speed using the knob.
Adjust the welding current using the knob C, the hot start.
Close the door again, and fasten it using the knob.
Select the required heating direction using the knob shown as item 21 in Fig . 4.
Select the operating time you require using the knob for minutes.
Adjust the volume to the desired level using the knob on the front panel.
The value can be changed using the knob AN.
Lock the deflector in position using the knob 1.
Next, open the heating valve manually using the knob on the actuator.
Adjust the wire speed and the welding voltage using the knob AI . and AN respectively.
Set the volume to 0 using the knob.
Set the temperature, using the knob.
Tighten the chain slightly using the knob see fig . 9.
It may be adjusted using the knob K1.
Adjust the desired cutting depth using the knob G Fig . 6.
Reel back in position, always using the knob 16.
You'll also be interested in:
Examples of using Knob
Show more
Press the volume knob during a call
Each knob is marked with an alchemical symbol
Turn the thermostat knob to a lower number
Examples of using Using
Show more
Mash kidney beans using a potato masher
Log in using the default administrative account
Proportion of households using a clean water source
