Examples of 'vacuum manifold' in a sentence
Meaning of "vacuum manifold"
vacuum manifold: Refers to a part of an engine or system that distributes or controls airflow. It is commonly used in automotive or engineering contexts to describe a component that regulates the flow of gases or liquids
How to use "vacuum manifold" in a sentence
Basic
Advanced
vacuum manifold
A cylinder of phosgene was attached to the vacuum manifold.
A vacuum manifold has been used for sample processing.
The reactor was disconnected from the vacuum manifold.
The vacuum manifold and all connecting lines were evacuated.
Place the sample plate on the vacuum manifold.
Place the plate on the vacuum manifold to drain the well contents.
The vacuum force may be applied by means of a multipoint vacuum manifold.
A vacuum manifold may be provided to apply a number of vacuum locations to the substrate.
The filter plate was placed on a vacuum manifold and dried.
Using a vacuum manifold or hydrostatic pump to draw the pools through the cartridges.
These many openings may communicate with a single vacuum manifold.
The filter plates are placed on a vacuum manifold to wash or elute the resin bed.
After fixation the aqueous phase was removed by filtration using a vacuum manifold.
The heater wells are connected to a vacuum manifold for collection of the contaminant vapors.
The samples were vacuumed through the filter plate using the vacuum manifold.
See also
A vacuum manifold may draw the discrete cord away as it moves down the conveyor.
The tube was then reconnected to the vacuum manifold and the electrodes.
The vacuum manifold and connecting lines were flushed with dry nitrogen into a caustic scrubber.
The vacuum was broken and the flask was attached to a vacuum manifold for further drying.
Therefore the vacuum manifold is locally a product of a Coulomb and Higgs branch.
The attached filter plate is added with sample and collection plate to the vacuum manifold.
The vacuum manifold assembly of Fig.
This reaction mixture was filtered through a Millipore multiscreen resist vacuum manifold.
Alternatively, a vacuum manifold was used.
Liquid was then removed from the wells using a Millipore vacuum manifold.
The nanocrystals were dried in a vacuum manifold and redispersed in chloroform or CDCl 3.
Figure 19 is a perspective view of a preferred method of rotating a vacuum manifold.
Figure 27 is a cross-sectional view of the vacuum manifold illustrating a second main passage ;.
The liquid flow is achieved by applying a vacuum to the apparatus through vacuum manifold 27.
The vacuum manifold 10 is somewhat concave, having its narrowest diameter at the center.
Suppose the vacuum is the vacuum manifold Σ.
A vacuum manifold ( Millipore, Billerica, MA ) was used to aspirate the buffer from the wells.
Each manifold plate has a self-contained vacuum manifold.
Two vacuum manifold systems rated at 15 and 1 micron.
The clots were dried for 1 hour over the vacuum manifold.
Rotary vacuum manifold 66 is connected to a source of vacuum ( not shown ) vÃa vacuum line 68.
Each housing also includes a flanged pipe stub 56 for connection to a vacuum manifold.
Figure 9 shows a picture of a thin-film vacuum manifold for blunt pin printing.
The side arm was connected in series to a straight bore stopcock and a 5 place vacuum manifold.
For the sake of simplicity, the vacuum manifold is not shown in Fig . 1.
An RNeasy 96 plate labelled with the appropriate plate number is placed in the vacuum manifold.
Vacuum manifold 221 includes a slot 307 defined in a longitudinal direction along its upper surface.
Figure 5 illustrates the silicone sleeve secured on the vacuum bottle within the vacuum manifold.
The vacuum channels 110 and 112 are connected to a vacuum manifold which is connected to a vacuum source.
Figure 4B is a perspective view of an alternate stationary vacuum manifold.
Figure 4B provides an alternate stationary vacuum manifold 333.
A second, microplate, PDE assay was developed using Multiscreen plates and a vacuum manifold.
At Station 5, the carton opener opens the cartons between pairs of vacuum manifold assemblies.
Mount the columns in a column washing device i.e. a Supelco Visiprep solid phase extraction vacuum manifold.
Figure 3 shows an embodiment using a standard vacuum manifold 30.
You'll also be interested in:
Examples of using Manifold
Show more
Connect gauge manifold to ports of stop valves
Manifold pressure should be checked with a manometer
The following flue manifold sizes are available
Examples of using Vacuum
Show more
The speed of the vacuum source shall be
If vacuum manure removal system is already installed
Provisions concerning vacuum operated waste tanks
