Examples of 'valve clearance' in a sentence
Meaning of "valve clearance"
valve clearance: In engineering, specifically in mechanics and automotive engineering, valve clearance refers to the small gap or space between the camshaft and valve lifters in an internal combustion engine. Proper valve clearance is crucial for engine performance and longevity
How to use "valve clearance" in a sentence
Basic
Advanced
valve clearance
Now adjust the valve clearance to specifications.
Valve clearance for cold engine.
You did not check valve clearance.
Inspect the valve clearance in the injection sequence.
Adjusting the intake and exhaust valve clearance.
Valve clearance intake valve and exhaust valve.
Check rocker arm to valve clearance and adjust.
Your valve clearance is somewhere between these two numbers.
Check and if necessary correct the valve clearance.
Check and adjust valve clearance when engine is cold.
Valve clearance should be inspected and adjusted when the engine is cold.
Check and adjust valve clearance.
Check valve clearance with the piston at top dead centre.
The engine must be cold when checking or adjusting the valve clearance.
Regular valve clearance check and adjustment will improve performance and extend engine life.
See also
The engine featured a revolutionary new method for adjusting the valve clearance.
Idle speed Valve clearance cold.
Today I have been fixing damages in the bike and did valve clearance check.
VALVE CLEARANCE INSPECTION The rocker cover must be dismounted to check the valve clearance.
Replace spark plug Check valve clearance.
Check valve clearance and adjust, if necessary.
If this value is not correct, adjust valve clearance.
Be sure to check the valve clearance as soon as possible!
Adjusting the adjustment screw to substantially eliminate the valve clearance gap ;.
If there is not, correct the valve clearance as described earlier.
Check valve clearance after the first fifty-hours of operation.
After tightening the jam nut, recheck valve clearance to make sure it did not change.
A, Valve clearance adjustment is critical to proper engine operation.
The camshaft operated the valves via hydraulic bucket tappets; valve clearance adjustment is automatic.
Valve clearance Check, replace if needed.
Adjustment is not needed if valve clearance is within the specification in Section 2 Engine.
After the first 50 hours of operation, adjust the valve clearance in the engine.
The valve clearance is too small Adjust the valve 2.
Replace fuel filter Check valve clearance 5.
Note, Adjust the valve clearance while the engine is cold.
Exhaust backfires m7 wrong valve clearance r7.
Incorrect valve clearance Check and, if need be, adjust.
Every 25 hours Check rocker arm to valve clearance and adjust.
Idle speed Valve clearance ( cold ) Other specifications.
Check / adjust spark plug Replace spark plug Check / adjust idle speed Check / adjust valve clearance.
Instructions are covered in the Valve Clearance Adjustment section of your owner 's manual.
Valve clearance was adjustable by screws and locknuts on the rocker arms . [ 2 ].
Tighten or loosen adjusting screw ( 2 ) to adjust valve clearance by checking thickness with thickness gauge 3.
Check the valve clearance after the first 25 hours of operation, then after 400 hour intervals.
Check and, if necessary, adjust the valve clearance on No. 3 cylinder.
Schedule B maintenance includes the oil, oil filter, tune-up, air cleaner, spark plug ( s ) and valve clearance.
GENERAL Valve clearance incorrect Contact with our dealer 5.3.
Approximate time in minutes ( 1 h 60 min ) * Times are calculated including valve clearance adjustment.
Transmission oil Check level o o Valve clearance Check-adjust o ( 2 ) Combustion chamber.
Using a feeler gage ( A ), measure the valve clearance.
You'll also be interested in:
Examples of using Valve
Show more
Lift the valve assembly up and out
Grasp black lever on one drain valve
Check valve assembly caps to ensure tightness
Examples of using Clearance
Show more
Clearance of the annual report on technical cooperation
I got special clearance through gate four
Clearance from countertop to unprotected overhead surface
