Examples of 'valve core' in a sentence
Meaning of "valve core"
Valve core: A small component found in valve stems, commonly used in vehicles and bicycles to control the flow of air or fluid
How to use "valve core" in a sentence
Basic
Advanced
valve core
Screw valve core into extender clockwise.
Presta without removable valve core.
Release valve core and continue with assembly.
Presta with removable valve core.
Tighten valve core with key turning clockwise.
The valve sleeve encircles the valve core.
The valve core is a poppet valve assisted by a spring.
These tools are referred to herein as valve core depressors.
The valve core is connected with an input member.
There may also be some kind of filter or sieve at the valve core.
Ensure that the valve core is firmly tightened in place.
A steering input shaft extending from the hand wheel is formed as the valve core.
A third valve core is provided in the third valve chamber.
On the upper end of the diverting valve core is provided a rotary valve stem.
A fifth valve core is provided in the fifth valve chamber.
See also
The dirt and impurities are mixed around the valve core and the moving iron core.
A fourth valve core is provided in the fourth valve chamber.
The control valve includes a valve sleeve and a valve core located coaxially within the valve sleeve.
A second valve core is provided in the second valve chamber.
It is then also possible to obtain a contact área for a Schrader valve core.
A first valve core is provided in the first valve chamber.
Do not tighten part A or turn the body when valve core is in open position.
Store the valve core in a place where it will not get dirty.
Use a Schrader valve tool to remove and replace the valve core from the valve body.
Always use the valve core included in the kit.
A valve core connected with a valve rod is placed inside the valve body.
Service port Valve core Setting pin.
A valve core including a valve pin is coupled to the valve housing in the valve chamber.
X Pull knob F out of valve core extractor H as far as it will go.
Turn key counter-clockwise to remove valve core.
The static valve core is installed immobily within the said chamber.
With the collar off, the valve core is free.
Reinstall the valve core to the valve body using the tool provided.
In addition, the seat of the valve core has a collar.
The dynamic valve core and the static valve core are made of ceramic materials.
In these solutions, a new housing adapted to the special valve core is required.
The valve core has at least a pair of passages for communicating with return pressure.
Inline - fits between valve core and valve body.
The valve core and valve sleeve are coaxial and relatively rotatable about their axis.
Properly torque the retaining nut and valve core to manufacturer 's specs.
The valve core and the valve sleeve each have a plurality of lands and grooves.
Due to aesthetic factors, the valve core of the figure below has been developed.
The valve core has axially extending lands with axially extending grooves between the lands.
Using the provided tool, remove valve core from the valve body.
A resilient valve core formed of an elastomeric material has a peripheral sealing surface extending there around.
Use the valve remover 2 to unscrew the valve core and place it on a clean.
When all the previous operations have been correctly done, refit the valve core.
The rotary valve includes a valve core and a valve sleeve which are relatively rotatable.
In order to prevent contamination, the seat of the valve core has a filter screen.
The valve body and the valve core are mainly made of brass and stainless steel.
You'll also be interested in:
Examples of using Core
Show more
Determine core needs for agenda development
Redefine permitted uses in the downtown core
Core findings of her presentation included that
Examples of using Valve
Show more
Lift the valve assembly up and out
Grasp black lever on one drain valve
Check valve assembly caps to ensure tightness
