Examples of 'valve cover' in a sentence
Meaning of "valve cover"
A valve cover is a protective cover that is placed over the valves of an engine to prevent dirt, debris, and oil leaks. It is commonly used in automotive engines
How to use "valve cover" in a sentence
Basic
Advanced
valve cover
No valve cover was attached to the valve seat.
Cautions for handling the valve cover.
Place on the valve cover and screw it closed.
Do not remove the poppet valve cover.
Make sure the valve cover gasket is in place.
Do not place wrenches on the valve cover.
Install new valve cover gasket.
Remove six screws to release valve cover.
Verify that valve cover gasket is properly posi.
Start six screws to install valve cover.
Valve cover bolt patterns are one.
Unthread the poppet valve cover slowly by hand.
The valve cover is made of magnesium to save weight.
Tightening the valve cover bolts.
The valve cover is powered by gravity.
See also
Change the top valve cover.
Your valve cover was shot.
Remove the screw on the stop valve cover.
Valve cover leaks are common on many older vehicles.
We are including a leather valve cover to dress it up.
The valve cover is sealed where indicated by the arrow.
The valve includes a valve cover and a valve body.
Valve cover racing is most commonly seen at car shows.
Remove the four screws attaching the valve cover.
Remove the valve cover from the outdoor unit.
Reinsert the valve stem and replace the valve cover.
Valve cover racing.
Shape wires so that the stop valve cover fits securely.
Preferably the adhesive is applied to the mating surface of the valve cover.
Shape wires so that the stop valve cover fit securely.
Valve cover and clutch covers were painted black as well as the wheels.
I was also the first to be eliminated in the valve cover racing.
Removing the valve cover may not require moving the control equipment.
Insert the upper part of the stop valve cover into the outdoor unit.
Open the valve cover oil and place four liters of new oil.
Attach the electric parts cover and the valve cover on the outdoor unit.
Open the valve cover and the electric parts cover of the outdoor unit.
Shape wires so that the service lid and stop valve cover fit securely.
For this purpose the bleed valve cover must be fitted with an additional connector.
Ambient conditions mean the conditions under which the adhesive is applied to the valve cover.
Close the steam valve cover and install the valve back on the lid of the.
The outer ring is fixed between the upper valve cover and the lower valve cover.
A valve cover located laterally outwardly from the flexible membrane ends at the controllable outlet orifice.
Shape wires so that the service cover and stop valve cover fit securely C.
Unthread the poppet valve cover from the poppet valve housing three full turns.
But when I pulled the valve cover.
Stop valve cover Binding part of binding band.
After applying, reinstall the valve cover or covers.
A Hachiko valve cover located only a few feet way from the actual statue.
The outside dimension from valve cover to valve cover ;.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Valve
Show more
Lift the valve assembly up and out
Grasp black lever on one drain valve
Check valve assembly caps to ensure tightness
