Examples of 'valve plate' in a sentence
Meaning of "valve plate"
Valve plate - In mechanical engineering or plumbing, a valve plate is a component that regulates the flow of fluids or gases by opening, closing, or redirecting the passage within a system or machinery
How to use "valve plate" in a sentence
Basic
Advanced
valve plate
Replace valve plate and gaskets.
Air leaks between head and valve plate.
The valve plate and back to the reservoir.
Piston hitting the valve plate.
The valve plate may be machined from plate stock.
This is therefore effectively a valve plate of normal conventional construction.
A valve plate is typically placed at the top of the cylinder.
Replace head and valve plate using new gasket.
The discharge valve is on an outer surface of the valve plate.
Because of that this valve plate realises an indexing movement.
It is therefore not necessary to machine the valve plate itself.
A valve plate is disposed intermediate the reservoir and the header.
Method of making a valve plate.
The porous valve plate is covered on a top surface of the sole.
With this arrangement there is always a valve plate construction.
See also
The valve plate generally comprises an intake port and exhaust port.
Butterfly valve plate.
The valve plate has a plurality of orifices and a single axial opening.
Head gasket or the gasket in the valve plate assembly blown.
Preferably said member is secured against rotation relative to said valve plate.
A discharge port leads through the valve plate to the discharge valve.
The valve plate slidingly engages this shoulder as the valve plate rotates.
An annular bearing locates on the rotary valve plate in engagement with the seal.
A valve plate is interposed between the cylinder block and the cylinder head.
Another effect of stopping the valve plate oscillation is to reduce the valve closing time.
It will be understood that the cylindrical body and the valve plate can be integrated.
A conventional valve plate having suction and discharge valves can also be used.
Selective control of the fluid stream takes place at the location of the valve plate.
Each stationary valve plate is connected to a vacuum pump for supplying a vacuum therethrough.
The bearing allows rotation of the rotary valve plate while the seal remains stationary.
Lower valve plate sticks Clean or replace the valve plate.
The thrust pad can be used to establish a connection between the valve plate and a cylinder.
Until today the valve plate and valve guide are assembled together by use of adhesives.
There is a small gap between the edges of the valve plate and the housing therefor.
A first valve plate having a passage therethrough ;.
This pressure acts on the pressure área pressing the valve plate against the port plate.
A corresponding valve plate 7 is located at the opposite side.
Consequently, the piston operates in a position closer to the valve plate.
As a result, the valve plate executes a type of rolling motion.
A dispenser, characterized in that the pipe section forms a valve plate.
A valve plate defining a discharge chamber and a suction chamber ;.
The following description focuses on the first named valve plate 6.
The valve plate extends outward, unplugging the water reservoir.
The following description focusses on the first named valve plate 6.
The valve plate presses against a flat gasket 62 disposed on a bearing surface in the cavity.
The end wall 5 of the cylinder is here in the form of a valve plate.
This allows rotary valve plate 25 to more freely rotate back to a lesser capacity position.
Figure 1 is a plan top view of the compressor body without valve plate.
In use, the gas may be fed to the valve plate through such conduit means.
Typically, the discharge valve seats against a valve seat on the valve plate.
You'll also be interested in:
Examples of using Plate
Show more
Put the upper plate on the stove
Face plate in position for shredding paper
Do not submerge hot plate or burners in water
Examples of using Valve
Show more
Lift the valve assembly up and out
Grasp black lever on one drain valve
Check valve assembly caps to ensure tightness
