Examples of 'valves are closed' in a sentence
Meaning of "valves are closed"
This expression refers to the act of shutting or sealing off the flow of fluid or gas through valves. It implies that the valves have been turned or adjusted to stop the passage or control the circulation of substances
How to use "valves are closed" in a sentence
Basic
Advanced
valves are closed
Ensure that the drain valves are closed.
All valves are closed except those indicated in each step.
Ensure that all other valves are closed.
The valves are closed on the compression and power strokes.
In the middle position both valves are closed.
Make sure all valves are closed tightly and properly.
The rest of the solenoid valves are closed.
The check valves are closed and the discharge valve is opened.
Hopefully all the valves are closed.
Service valves are closed from the factory and ready for brazing.
Any external bypass valves are closed.
Both valves are closed using the auxiliary force of a compression spring each.
All of the other valves are closed.
The valves are closed and opened independently owing to the adjusted temperature.
And the pulmonary and aortic valves are closed.
See also
Fueling valves are closed.
Ensure that the the service manifold valves are closed.
The stop valves are closed.
During these two phases all of the valves are closed.
The other valves are closed.
Dissipation time of the product in the pipeline once valves are closed.
The semilunar valves are closed.
All valves are closed until the operator can remove the air bubble.
Upper wall sluice valves are closed.
These valves are closed when the collecting container 6 is to be pressurized.
The various valves are closed.
The opening of the collar is permitted by a hydraulic stop when the valves are closed.
All other valves are closed.
The compressor is turned off only when all the solenoid valves are closed.
All water valves are closed.
It is then pumped to a horizontal cocoa liquor press and the filling valves are closed.
The intermediate valves are closed.
Both valves are closed and the air / fuel mixture is ignited.
Check that gas and liquid stop valves are closed.
Make sure the stop valves are closed and do not open them.
No blood flow occurs during this phase because all the valves are closed.
Clearly the exhaust valves are closed throughout the actual forming process.
LOX and hydrogenfilling valves are closed.
The intake and exhaust valves are closed and the electrical contact switch is open.
In the normal position, these valves are closed.
Ensure both ball valves are closed before proceeding Q.
When the machine is inactive, all valves are closed.
No water Valves are closed Filter clogged.
At this point, the intake and exhaust valves are closed.
Therefore, if the valves are closed and the coolant.
In this position, the intake and exhaust valves are closed.
Condensing unit liquid and suction valves are closed to contain the charge within the unit.
During the ventricular systole, the semilunar valves are closed.
Of course, these valves are closed in the other direction.
In the case of power failure, the gas valves are closed.
