Examples of 'vdd' in a sentence
Meaning of "vdd"
vdd (adjective) - This phrase is an abbreviation commonly used in some contexts to refer to a certain type of certification or standard. It may stand for 'Verified, Declared, and Disclosed', among other variations, usually related to compliance or authenticity checks
How to use "vdd" in a sentence
Basic
Advanced
vdd
Vdd dat clk right left gnd scrl up scrl nd.
They all have their gates at Vdd.
Moreover reduced or null Vdd may apply to some parts of circuitry.
The power unit supplies a supply voltage Vdd.
The voltage Vdd can be higher than the threshold voltage of the transistor.
Here this determination is based on the rail voltage Vdd.
The terminal Vdd also forms part of this further power supply voltage.
The drain areas of the transistors are connected to voltage Vdd.
These two inverters are placed between a supply voltage Vdd and the differential stage.
This indirectly amounts to regulating power supply voltage Vdd.
The positive supply voltage Vdd of the pixel can advantageously be used for this purpose.
The circuit is polarized between a voltage Vdd and the ground.
Terminal Vdd is connected to positive local supply line PL.
It is then formed of a MOS transistor controlled by an integrated circuit regulating voltage Vdd.
The neutral point NP is at Vdd for all the cells.
See also
This restarting causes a progressive increase of local supply voltage Vdd.
A terminal for receiving a positive supply Vdd is connected to line PL.
The other end of the tank circuit is linked to a supply voltage Vdd.
This line swings from GND to Vdd and is always driven by the programmer.
It has its gate controlled by the core power supply voltage Vdd.
The Vdd pin.
The purpose of this phase is to charge the control lines to a positive voltage Vdd.
A voltage Vdd of 4 volts is therefore also provided to provide power to the slave device 3.
Generating a higher gate voltage allows the photodetector to be reset at a level close to Vdd.
In practice, operations at low supply voltage Vdd often also require a low supply current.
The importance of asymmetry between both gates depends on the power supply voltage Vdd.
However reduction in Vdd augments the impact of variability and timing errors in sub-nanometer designs.
Each switch transistor is made conducting by connecting its gate to the high potential Vdd.
Notations used, Vm and Vdd designate the two logic supply voltage levels of the circuit.
This is always the case for the leads having the fixed potential Vss or Vdd.
Conventionally, voltage Vdd is higher than voltage Vss.
A load is inserted between the drain of the transistor and the supply voltage source Vdd.
Thus, the logic supply voltage Vdd is switched over to the node N.
The result would be that the gate signal would discharge into the voltage source Vdd.
The voltage Vdd is derived from a rectification, filtering and regulation circuit RD.
There are also cross product terms of both the target Vdd and the input envelope.
Switch 9 thus allows voltage Vdd to be selectively applied to connection D when it is closed.
The drain of transistor SF is connected to supply rail Vdd.
The output of the Vdd modulator is an actual Vdd power signal represented as Vdd ( n ).
Each bit cell also has a Vdd and Vss.
A terminal Vdd and a terminal Vss are connected to a power supply VB and ground, respectively.
In either case this line swings from GND to Vdd.
Supply voltage Vdd may be on the order of 1 V.
The output line Sk is thus precharged to the voltage Vdd.
The potential Vdd is applied to the end of the resistor R 1.
The voltage VPC is less than the voltage Vdd.
Voltages Vmin and Vmax may be generated from voltage Vdd by DC / DC voltage converters.
The substrate areas of the PMOS are connected to the positive voltage terminal Vdd.
In the presently preferred embodiment, the supply voltage Vdd is applied to this input E.
The oscillator circuit is powered via two power supply terminals Vss and Vdd.
