Examples of 'vent plug' in a sentence
Meaning of "vent plug"
Vent plug: is a term commonly used in engineering or mechanical contexts to describe a device or component that allows the controlled release of pressure, air, gas, or liquid from a closed system
How to use "vent plug" in a sentence
Basic
Advanced
vent plug
The vent plug is not obstructed by dirt or paint.
The above embodiment is described in terms of a vent plug.
Reinstall vent plug when finished.
The above configuration is described in terms of a vent plug.
Close air vent plug tightly.
Slowly open the suction valve until liquid flows out of the vent plug opening.
Be sure the vent plug is free of grease in order to relieve pressure.
Fill the unit with lubricating oil and make sure the vent plug is positioned uppermost.
Loose cap or air vent plug can cause leak of fuel during shaking the tank.
When volute is completely filled with water, tighten vent plug.
Start the pump motor with vent plug open approximately two turns.
With a vented funnel, completely fill the casing with liquid at the vent plug opening.
Remove the pin from the vent plug on the gear box see above.
Up to one year: - Store gearboxes with a ventilation unit with the vent plug on top.
Place the vent plug in the highest position possible!
See also
In accordance with another embodiment, the vent plug is formed of a mechanical valve.
The rearward end of the flashback chamber is closed by a porous vent plug 472.
Before commissioning, the oil vent plug must be replaced with the reservoir.
If problem persists, replace vent plug.
Maintain the connections and the vent plug adjustment per the manufacture 's recommendations.
The rearward end of the flashback chamber 50 is sealed by a porous hydrophobic vent plug 52.
In accordance with one embodiment, the vent plug is made from or includes a super-absorbent polymer.
Needle hub 41 can take the form of a flashback chamber having a vent plug 42 affixed thereto.
Fig . 7 shows a vent plug as one embodiment of a flush nozzle used.
Remove shipping plug and replace with air vent plug ( included ) before initial use.
Open de vent plug to clean the air ( possible air bubbles ) during this process.
What I said above about the vent plug etc. is going to be true.
The vent plug has a vent passageway 28 " in the form of a through-bore.
Alternatively, the termination end vent plug 74 can be formed of a hydrophobic material.
The vent plug 202 can be removed and an IV-line attached for normal infusion.
As in the prior embodiments, the vent plug 93 preferably includes an anti-bacterial agent.
The other opening of the Y-site can have a conventional vent plug 190.
To bleed through fuel filter 's air vent plug or fuel pump 's air vent plug.
A removable vent plug 39 can be placed in the proximal end of needle hub 35.
Fig . 3 depicts a partial sectional view of a vent plug affixed to a drip chamber ; and.
Suitable material for the vent plug 62 is a sintered polyethylene with an imbedded super-absorbent polymer material 63.
Beware, When mounting place the vent plug in the highest position possible!
Remove the vent plug of the oil cooler, wait 5 minutes, remove drain plug 7-Fig.
