Examples of 'vertical cut' in a sentence
Meaning of "vertical cut"
vertical cut: This phrase refers to a cutting technique or action that occurs in an up-and-down motion or direction, typically perpendicular to the horizon or ground. It is commonly used in various fields such as hairdressing, cooking, gardening, and woodworking to create precise and controlled cuts
How to use "vertical cut" in a sentence
Basic
Advanced
vertical cut
This is a vertical cut that we are talking about.
The process is repeated for a vertical cut.
Said vertical cut may be continuous or discontinuous.
Square pockets with a vertical cut.
At a vertical cut through the materials.
Reproduction of pathé and edison vertical cut records.
One or two electrical vertical cut outs can be specified on each side.
The filter fabric side goes in direct contact with the soil of the vertical cut.
Only one electrical vertical cut out can be specified.
Vertical Cut with cutter bar at an angle.
You make a vertical cut.
ISNA holds the same position on the issue of the first vertical cut.
This is a vertical cut.
Make a vertical cut otherwise it 's much less effective.
Stitches in that vertical cut.
See also
Make the vertical cut first, then the horizontal cut.
It involves a second and more painful vertical cut on the belly.
She would make a small vertical cut then on either end of the horizontal cut.
I would get if I were to make a vertical cut.
Common design of solenoid stem, vertical cut grooves and vents of movable core.
Make the horizontal cut into the buttress first, followed by the vertical cut.
This implies that the horizontal and vertical cut frequencies remain the same.
Vertical cut / lawn edge trimming.
Using a Stanley knife make a small vertical cut in the overlap near the ceiling.
Check that the bevel scale ( u ) reads 0 when positioned for a vertical cut.
Starting at the umbilicus, you are gonna make a vertical cut straight down toward the pubic bone.
Fig . 8 is a vertical cut of a microphone provided with hollow pipes for the received sound ;.
Learn to tackle problems from a system viewpoint, taking a vertical cut and following a cross-layer approach.
Figure 5 shows a vertical cut view of the same workpiece holding device ;.
Adjusting for accuracy of 90 cut vertical cut.
Figure 4 shows a vertical cut through a second embodiment, not claimed.
Available styles include solid or one vertical cut out at 18 " high.
Make a vertical cut into the buttress root Fig . 11.
Electrical cut outs are located 18 " above the floor with one or two vertical cut outs.
Cylinder, A set of multiple tracks using a vertical cut ( taking one from each side ).
Make the horizontal cut ( A ) into the buttress first, followed by the vertical cut B.
A clean, straightforward, vertical cut.
A cut . A clean, straightforward, vertical cut.
