Examples of 'vertical loads' in a sentence
Meaning of "vertical loads"
vertical loads: Refers to the downward forces exerted on a structure, component, or system in a vertical direction. This term is commonly used in engineering, architecture, and construction to describe the weight or pressure acting vertically on a building or its elements
How to use "vertical loads" in a sentence
Basic
Advanced
vertical loads
Allowance for dynamic effects of vertical loads.
Given vertical loads as a composite section.
Railway structures resistance to vertical loads.
Vertical loads acting in sections.
Track resistance to vertical loads.
The vertical loads are the dead and live load.
To be used for improving longitudinal flexibility and resistance to vertical loads.
Vertical loads on structures.
A truss is how structural engineers shift vertical loads laterally to distant supports.
Vertical loads are contraindicated.
It should be possible to keep the boards plane when subjected to vertical loads.
The vertical loads are transferred from the deck by means of a separate support system.
Trapezoidal sheeting is commonly used to transfer vertical loads to the main rafters.
Mechanical loads included vertical loads imposed directly to the slab or indirectly through columns.
These two elements are responsible for transferring horizontal and vertical loads to the foundations.
See also
Works by spreading vertical loads over a sufficient area to ensure the structure will not subside.
Typical properties of laterally loaded foundation are significant lateral loads compared to the vertical loads.
This roll torque modifies the distribution of vertical loads on the main landing gear sets.
Vertical loads were applied to the beam through eight identical jacks evenly spaced FIG.
Nonbearing wall is a wall which does not support vertical loads other than its own weight.
It was found an excellent approximation between MPT and MEF models for distributing vertical loads.
The resistance of the track to vertical loads shall be consistent with these values;.
Resistance of the track, switches and crossings to vertical loads.
The projections help to support the vertical loads without horizontal deflections in the chair 10.
Under normal conditions, the beams are subject to primarily vertical loads.
On the front train the expected vertical loads are, EPMATHMARKEREP.
The vertical loads considered in the floors below according to Table 4.
Also, in all probability this hinge can not assume vertical loads.
Vertical loads I are applied to generate the flexion-extension bending moments.
Upper stabilizing surfaces 24 are inclined to resist both downward vertical loads and side loads.
Vertical loads of 550 kPa are common for unpaved roads.
On the rear train the expected vertical loads are, EPMATHMARKEREP.
Support column 160 has a cross-sectional configuration sized to suitably bear anticipated vertical loads.
Calculation of the horizontal thrust H2 due to vertical loads below the belt ββ ' first floor.
Such stresses create a bending moment, and the reactions should be, after all, vertical loads.
In equation 9, is the sum of all the vertical loads of the structure.
Vertical loads are controlled by air springs 30 and the front ends of beams 22.
The resulting beam 28 is stiff against vertical loads.
During an earthquake, the ground movement induces lateral, or horizontal, and vertical loads on a building.
You'll also be interested in:
Examples of using Loads
Show more
Connection of the loads to the output connectors
Loads should tumble freely during washing
Resistant to heavy loads with multifunctional activities
Examples of using Vertical
Show more
Mark the vertical set of bracket holes
Turn the knob in the vertical position
Minimum vertical angles of light distribution in space
