Examples of 'vicat softening' in a sentence
Meaning of "vicat softening"
vicat softening: A material science term referring to the temperature at which a material softens under a specified load. This phrase is commonly used in the field of polymer engineering and material testing
How to use "vicat softening" in a sentence
Basic
Advanced
vicat softening
A vicat softening temperature of min.
The relaxation temperature is preferably above the vicat softening point.
The Vicat softening temperature of test C is much too low to enable practical use.
Planar composite with layers of plastic of different vicat softening temperatures.
The vicat softening temperature can be used to compare the heat-characteristics of different materials.
All the compositions have high Vicat softening temperatures.
In both cases, the Vicat softening temperature was related to the degree of imidization.
Longer thermal durability due to the higher Vicat softening temperature.
The Vicat softening temperature can be used to compare the heat-softening characteristics of different materials.
The outer and core layers have differences in flexural modulus and Vicat softening point.
Maximum differences in the Vicat softening temperatures of 60 K are often observed.
The outer and core layers have differences in tensile elastic modulus and Vicat softening temperature.
Figure 7 shows a graph of Vicat Softening Temperature Tv versus density.
No . material of chain guide trade mark tensile strength density bending strength vicat softening temperature.
Tensile strength increased and Vicat softening temperature went up 7-9°C which was unexpected and surprising.
See also
These may include thermal expansion coefficient, heat deflection temperature, vicat softening point, etc.
The Vicat softening temperature of a thermoplastic component shall be above 70 °C.
With crystalline polymers only the Vicat Softening Point is applicable.
The Vicat softening temperature of a thermoplastic component must be above 70 °C.
The term " softening temperature, " as used herein, refers to the Vicat softening temperature.
The Vicat softening temperature of a thermo-set component must be above 70 ºC.
For structural components, the Vicat softening temperature must be at least 75 ºC.
The Vicat softening point is nearer to 85 ° C. when the terpolymers have a low proportion of comonomers.
The polymer desirably has a Vicat softening temperature that is greater than 50°C.
The Vicat Softening Temperature ( VST ) is the temperature at which the penetration reaches 1 mm.
Polycarbonate is in fact characterized by a vicat softening temperature equal to 156°C.
The Vicat softening temperature of the resulting polystyrene was determined using ASTM D 1525.
For structural components, the Vicat softening temperature shall be at least 75 °C.
Vicat softening temperature ≥ 74 ; Dry oven test, no signs of bubbles or cracks.
For structural components, the Vicat softening temperature must be at least 75 °C.
The Vicat softening temperature of a thermo-set component must be above 70 °C.
In addition, preferred backsheets demonstrate a Vicat softening point of at least 45°C.
Thermal properties The Vicat softening temperature was determined at 5 Kg in oil according to ISO 306.
Further, the polymer mixtures of Examples 1-8 were characterized by a Vicat softening point greater than 75°C.
The Vicat softening temperature of a thermo-set component shall be above 70 °C.
The so obtained material showed a Vicat softening point not lower than 250°C.
Vicat softening temperatures are measured in accordance with ASTM D1525.
A disk prepared from the same material shows a Vicat softening point not lower than 315°C . Example 6.
Vicat softening temperatures were measured in accordance with ASTM D1525.
The test piece was also measured for Vicat softening temperature according to JIS K 7206.
The Vicat softening point of the inventive compositions determined in accordance with ASTM D-1525.
Thermal properties, The Vicat softening temperature at 5 kg was determined according to ISO 306.
The Vicat softening temperature, like Vicat A50 at 10 N, reflects the heat softening characteristic of polymers.
In all cases, the Vicat softening points of the polymers are as measures by ASTM D1525.
You'll also be interested in:
Examples of using Softening
Show more
Softening and refreshing it restores a radiant complexion
My guess is they are softening us up for a major offensive
Softening is best done more gently on low power
Examples of using Vicat
Show more
A vicat softening temperature of min
The relaxation temperature is preferably above the vicat softening point
Vicat tests were performed to determine the initial and final setting times
