Examples of 'viscosimeter' in a sentence
Meaning of "viscosimeter"
Viscosimeter is an instrument used to measure the viscosity of liquids
Show more definitions
- A viscometer.
How to use "viscosimeter" in a sentence
Basic
Advanced
viscosimeter
The use of a viscosimeter can be very helpful.
He claimed that part of the required answer was a viscosimeter.
Viscosity may be measured by a viscosimeter and may be expressed in centipoise.
The viscosity was measured in a capillary viscosimeter.
Dry the viscosimeter by removing acetone with compressed air or in vacuum.
Reciprocal specific viscosity is determined using a capillary viscosimeter.
The viscosimeter according to the present invention allows such a measurement to be taken.
Cone and plate viscosimeter.
The absence of gasket greatly improves the durability and the robustness of the viscosimeter.
This viscosity is measured by means of a Heake viscosimeter equipped with concentric cylinders.
Mix the solution properly and transfer it to the viscosimeter.
Viscosity was measured using a viscosimeter Brookfield RVT type.
These measurings are performed with a conventional FANN type viscosimeter.
A LOW SHEAR viscosimeter was used for the measurements.
The viscosity was determined by an Ubbelhode viscosimeter.
The viscosimeter according to the present invention is particularly adapted for,.
Viscosity was measured with a Brookfield viscosimeter.
To measure outlet time, the viscosimeter is rinsed twice with the sample.
The viscosity of the final mixture was evaluated by measuring with a Brookfield viscosimeter.
This is achieved after exchanging the fluid within viscosimeter V and isolating the latter.
The respective values were determined in the first place by using a BROOKFIELD RVT viscosimeter.
The filling of viscosimeter V comprises several stages,.
The viscosity of the syrup can be easily measured with a Rheometer or viscosimeter.
NOTE, Using a Sears Viscosimeter will help in measuring the viscosity or thickness of the material.
These measurings are carried out with a conventional viscosimeter of the FANN type.
Isolation of the viscosimeter and increase in the flow rate in the main circuit ( sequence 03 ).
The melt viscosity was determined using the ICI cone and plate viscosimeter.
The viscosimeter is equipped with a measurement system of the anchor type MS-R3.
The resulting cooled solution is placed into a Schott Viscosimeter.
Viscosity measurements were made with a Brookfield viscosimeter using a spindle 3 and a rotational speed or 50 rpm.
The Brabender viscosigraph can then be replaced by an Ostwald type viscosimeter.
Viscosimeter V allows to carry out discontinuous measurings, at determined time intervals, for example, every hour.
Viscosity and flow threshold measurements were carried out using a LOW SHEAR viscosimeter.
Viscosity was determined with an Ostwald viscosimeter at a temperature of 25 °C.
Detectors, refractometer, ultraviolet diode array and differential viscosimeter.
Measured using a Haake RV 20 rotation viscosimeter according to the manufacturer 's instructions . Colour number.
Latex viscosity was measured using Brookfield RVT viscosimeter.
The viscosimeter can be for example a Rheomat 180.
The assay is carried out in a vibration viscosimeter e . g.
Viscosimeter of the Brookfield type is used with a spindle of size ( No. ) 05.
The resulting reduction in viscosity may be determined by a vibration viscosimeter e . g.
Measured at 23°C using a Brookfield RVT viscosimeter at a spindle speed of 20 rpm.
The kinematic viscosity of the mixed solution was measured by use of a Cannon-Fenske viscosimeter.
This viscosity can be measured using a Brookfield viscosimeter according to standard ISO 2555.
Viscosity values are therefore reported at a noted temperature and shear rate, using a particular viscosimeter.
The solutions were tested with a Brookfield viscosimeter ( type B, rotations, 60 rpm ) for viscosity.
The viscosity ( expressed in poises ) corresponding to the liquidus temperature is measured with a rotating viscosimeter.
Measurement Equilibrate the viscosimeter in the 42°C water-bath for at least 30 minutes before measuring.
The value obtained is then corrected by the Hagenbach-Couette coefficient provided with the viscosimeter.
This viscosity can be measured, for example, using a viscosimeter of cone / plate type.
