Examples of 'viscosity values' in a sentence
Meaning of "viscosity values"
viscosity values: This phrase is used in the context of fluid mechanics to describe the measure of a fluid's resistance to gradual deformation by shear stress or tensile stress
How to use "viscosity values" in a sentence
Basic
Advanced
viscosity values
All viscosity values are measured at room temperature.
Cellulase treatment lowered the viscosity values substantially.
And viscosity values prior to the ozone step.
No results are reported on the reduction of kappa or viscosity values.
Deducing the viscosity values at the required temperatures.
Note that both numbers are grades and not viscosity values.
Below is a table of viscosity values for some common materials.
The polymer molecular weights were determined from the viscosity values.
The viscosity values were similar to those of a commercial chocolate milk.
Many patents mention possible viscosity values of inks for ink jet printing.
The low viscosity values of the polyoxazolidines is particularly advantageous in these formulations.
These additives may be added provided viscosity values do not become too high.
The main viscosity values for the most commonly used products are.
This made it possible to access particularly low viscosity values and shear rates.
Visually the viscosity values of the other examples were comparable.
See also
In particularly preferred embodiments the glue composition also displays these viscosity values.
The complex viscosity values of the two tests are compared.
The selection of the proper carbomer provides the antimicrobial formulation with the desired viscosity values.
The measured viscosity values are recorded for the respective lots as above.
Figure III shows a series of configurations to achieve different final viscosity values.
All viscosity values are good or acceptable for the tested coating compositions.
The lower the Mooney viscosity values the better.
Such high viscosity values at relatively low concentrations are especially beneficial in food applications.
These large assemblies were highly hydrated, and had very high viscosity values.
These viscosity values consequently prove to be suitable for the automatic filling of hard capsules.
However, both higher and lower viscosity values may be desirable in some cases.
Two viscosity values are reported for the measurements during the heat aging study.
The decline affected in particular the pH, transmittance, osmolality and dynamic viscosity values.
All viscosity values referred to herein are determined on a Brookfield viscometer.
The bottles are stored and particle size and viscosity values are determined at 1 month.
All the viscosity values are determined at the level of the Newtonian plateau.
Moreover, the presence of fatty acid derivatives safeguards against excessive viscosity values.
Representative viscosity values of the feedstream are presented in Table I.
Additionally, the materials do not have high viscosity values at low shear rates.
The viscosity values are presented in table 7 below.
The thickness values and viscosity values are shown in Table 3.
The viscosity values obtained at different temperatures are listed in the table below,.
The Methocel ® molecular weight was described in terms of viscosity values in centipoise.
The following viscosity values are obtained,.
Viscosity values are therefore reported at a noted temperature and shear rate, using a particular viscosimeter.
Table 4 shows the average viscosity values for exemplary vehicles generated.
The viscosity values measured in-process were lower at the second section of the slit-die.
As a result of hydrolysis reaction viscosity values of samples decreased 69% at maximum.
These viscosity values will be used to determine the molecular-weight distribution of the polymer.
After an equilibration time of 2 minutes has elapsed, record the % torque and viscosity values.
High zero-shear viscosity values may also be indicative of particle suspension capability.
Two people independently prepared the indicated samples and measured their viscosity values ( n = 1 ) for each person.
Unless mentioned otherwise, the viscosity values mentioned in the application are static viscosity values.
Fluid at 4°C, the polymer gelifies with increasing temperatures, providing high viscosity values at room temperature.
The reported viscosity values are the values detected by the instrument after 1 minute of measurement.
You'll also be interested in:
Examples of using Viscosity
Show more
High viscosity materials applied without problems
Effects of polysaccharides on viscosity in the rheology of foods
Its viscosity lets an unctuous consistency reappear
Examples of using Values
Show more
The measured values shall be plotted on a graph
Date and time revert to default values
Carrying values and estimated fair values
