Examples of 'void ratio' in a sentence
Meaning of "void ratio"
Void ratio: A term used in geotechnical engineering to describe the ratio of the volume of voids (empty spaces) in a soil or rock mass to the total volume of the material. It is commonly used to assess the compaction and permeability of soil
How to use "void ratio" in a sentence
Basic
Advanced
void ratio
The void ratio is so adjusted to improve the battery capacity.
The coefficient of permeability of a saturated soil is a function of void ratio.
They have low values in void ratio and in index permeability.
Void ratio of a soil.
The fabric is highly permeable due to having a high void ratio in its structure.
Void ratio of an aggregate.
The material has a relatively high void ratio that provides it with a high evaporative capacity.
The void ratio of a molded article is measured by the following method.
In a counter-flow configuration, the void ratio of the packing elements is particularly important.
The void ratio of peat varies with the type of peat and moisture content.
Cc is the compression index . e0 is the initial void ratio.
Thus an optimum void ratio exists for particularly liquids and gases.
In the same manner, kh also changes with the void ratio ( e ).
Void ratio and mean pore size were measured using a SEM mercury porosimeter.
Key words, frost heave, clayey silt, overconsolidation, void ratio.
See also
This is because the void ratio was low in the molded article of Example 1.
Key words, clays, hydraulic conductivity, liquid limit, liners, void ratio.
Void ratio and other characteristics are made substantially similar to those of Example 1.
Key words, footings, cemented layer, layered system, weakly bonded, high void ratio.
The void ratio at this stage before curing and consolidation was 6.8.
Key words, natural soil, clayey sand, Singapore Old Alluvium, heterogeneity, granular void ratio.
A typical void ratio after consolidation in this reference work would be 10.9.
Key words, measurement resolution, void ratio error, sand, liquefaction, residual strength, flow slide.
The void ratio calculated from the true density and aerated bulk density may preferably be 62 - 75 %.
When the void ratio exceeds 75 %, toner scattering and toner leak are liable to occur.
You'll also be interested in:
Examples of using Ratio
Show more
Gross enrolment ratio at secondary level percentage
Ratio of owned versus leased office space
See proper dilution ratio instructions on bottle
Examples of using Void
Show more
Void mode transaction counter and total
Your winch and void your warranty
A void you will never be able to fill
