Examples of 'volume percent' in a sentence
Meaning of "volume percent"
Volume percent refers to a unit of measurement used to indicate the concentration of a substance in a liquid or gas mixture. It represents the volume of the substance as a percentage of the total volume of the mixture. This measurement is often used in chemistry, pharmaceuticals, and other scientific fields to express the concentration of solutions or mixtures
How to use "volume percent" in a sentence
Basic
Advanced
volume percent
The oxygen concentration is presented in volume percent.
Distillate and residues are reported as volume percent of material going to the centrifugal still.
This thickness increases with lower volume percent.
This can be achieved by selecting a high volume percent loading of piezoelectric ceramic particles.
The measurement unit of compactness or porosity is in volume percent.
The phosphoric acid content was based on volume percent of the total clear coat composition.
All gas concentration percentages are expressed as volume percent.
Volume percent porosity and median pore size are determined from mercury intrusion porosimetry.
It is expressed in units of volume percent of oxygen.
Degree of crystallinity can be expressed as either a weight percent or a volume percent.
The stability is given as the volume percent of the total composition which underwent separation.
This detergent is added to the buffer in volume percent.
The volume percent composition of the final bar depends upon size reduction during dehydration.
The percentages are in volume percent.
The volume percent crystallinity of each sample of copolyester taken is shown in Table I.
See also
For paramagnetic oxygen transducers the displayed unit is fixed as volume percent.
Volume percent is a common expression of a solution 's concentration.
The right ordinate denotes percent acetonitrile m volume percent in the feed solution.
The plasma volume percent increased, and polyuria occurred.
The solid content can be expressed either as weight percent or preferably as volume percent.
This appears to illustrate a strong correlation between volume percent carbide phase and wear resistance.
The approximate final compositions of those four blends are indicated below in volume percent.
Table 6 reports the actual volume percent in air as observed.
The measureable concentration ranges are typically from a few hundred ppm to a few volume percent.
The volume percent of amorphous phase in the alloy is conveniently determined by x-ray diffraction.
The brake lining must contain at least 3 volume percent of aramid fiber.
The volume percent of cermet phase ( and cermet components ) excludes pore volume due to porosity.
The amount of either wollastonite or calcium silicate in each sample was 10 volume percent.
This resulted in an approximate 20 volume percent methyltrichlorosilane solution.
Hydrogen can be added to the reaction medium in amounts of about 10 volume percent.
Most preferably, at least 40 volume percent of martensite are oriented.
Infiltration was accomplished in five hours using a gas comprising 50 volume percent nitrogen.
More preferably, at least 30 volume percent of martensite are oriented.
Preferably, the concentration of the polyvinyl alcohol solution is about 6 volume percent.
This mixture resulted in a 33 volume percent diamond composition.
The oxygen level in the gas exiting the calciner was 9 volume percent.
Preferably, a fraction of at least 20 volume percent of martensitic grains is oriented.
The dry content can be expressed either as weight percent or, preferably, as volume percent.
Only proteins presenting a volume percent above 0.5 were considered for analysis.
The conformable magnetic article has a binder comprising at least 30 volume percent of magnetic particles.
For each aforesaid volume percent distillate fraction from step ( c ).
The oxygen level in the dehydrating unit was about 21 volume percent during operation.
The volume percent of coarse dry particles is greater than 50 volume percent.
A second layer adjacent the first layer has at least 85 volume percent carbide composition.
Preferably, the 15 volume percent of the catalyst is distributed throughout the reaction zone.
This normally results in a dry expanded product which is more than 90 volume percent microspheres.
These composites utilized about a 65 volume percent loading of Ca-PT in an organic polymer.
The material of the invention preferably has a surface porosity of less than about 30 volume percent.
An alcohol content greater than 5 volume percent and up to 10 volume percent.
The amount of filler in each sample was 10 volume percent.
You'll also be interested in:
Examples of using Percent
Show more
One hundred percent successful delivery rate
Management wants us to cut another ten percent
I will give you ten percent of my winnings
Examples of using Volume
Show more
Check if the volume is set high enough
Volume will be increased only in receiver mode
Wine of a beautiful volume with a roasted final
