Examples of 'volume resistivity' in a sentence
Meaning of "volume resistivity"
volume resistivity - Volume resistivity is a measure of a material's resistance to the flow of electric current. It is an important property in the field of electrical engineering and materials science, describing how well a material can insulate against or conduct electricity
Show more definitions
- The resistance to leakage current through an insulating material body.
How to use "volume resistivity" in a sentence
Basic
Advanced
volume resistivity
Method for measuring powder volume resistivity.
The volume resistivity is measured by the following method.
They have a low volume resistivity.
The volume resistivity of the plaques was also measured.
Evaluated based on the results of measurement of the volume resistivity.
A volume resistivity of an intermediate layer can be measured as follows.
The static decay and volume resistivity was then measured.
Volume resistivity and electrical breakdown were measured on few polymers.
The reciprocal of volume resistivity.
The volume resistivity was measured for one of the batches.
An increase in carbon black content will reduce volume resistivity.
The volume resistivity value is a mean of the six measurements.
Plasma has a very high volume resistivity compared with tissue.
The volume resistivity is a specific resistance of the given material.
It is further difficult to obtain values for the volume resistivity in a consistent way.
See also
High volume resistivity.
The amount of electroconductive material may be controlled to obtain a predetermined volume resistivity.
The volume resistivity means specific resistance of the given material.
Thus the allowed lower limit for the volume resistivity can vary widely.
The volume resistivity of the compositions was determined in the following manner.
The discs with one and the same volume resistivity may have varying surface values.
The volume resistivity correlates with the aforementioned air resistance and porosity.
They have excellent crack resistance under soldering and high volume resistivity with excellent electrical characteristics.
It is the volume resistivity of the member divided by the thickness of the member.
SF showed a tendency to decrease volume resistivity with time.
Volume resistivity for all examples is measured with the method described herein.
Insulation Sheet has a large volume resistivity and resistance to breakdown of the plastic sheet.
Figure 4 is an instrument for measuring volume resistivity.
In such cases the volume resistivity should be referenced to a corresponding range of applied fields.
In particular, they have a reduction in the volume resistivity with temperature.
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials.
However, a metal or alloy having a low volume resistivity can also be used.
Low volume resistivity is desirably to suppress static charge accumulation on the tire and vehicle.
After pressing and curing the volume resistivity was measured as shown in Table III.
The volume resistivity p in the Z direction of the material is calculated by the following equation.
The surface resistivity and volume resistivity are shown on the following table,.
The volume resistivity of each sample was then measured as shown in Table II.
Measurement of alternating current impedance at frequency of 20 kHz and determination of volume resistivity.
Adapt volume resistivity for EMC applications.
Basically, as an air resistance decreases and a porosity increases, a volume resistivity tends to reduce.
Theoretical volume resistivity of BaTiO 3.
As a result, polypropylene intrinsically possesses a low loss factor and high volume resistivity.
The volume resistivity of compression molded samples is not affected by CaCO3.
After the sintering, the film thickness and volume resistivity were measured to evaluate the conductivity.
Then, volume resistivity was calculated by measuring electric resistance of the sample.
Each of these processing steps effects the volume resistivity of the extruded shield, generally adversely.
Volume resistivity measurements were not carried out, because most of specimens had insulating layers.
A sealing film having the above-mentioned volume resistivity shows a sufficiently high insulation property.
In certain embodiments, the invention provides compositions for improved electrical properties such as volume resistivity.
The smaller the volume resistivity value, the better the conductivity.
You'll also be interested in:
Examples of using Resistivity
Show more
The resistivity due to these collisions is small
A material having low resistivity is a good conductor
Resistivity andhall effect of germanium at low temperatures
Examples of using Volume
Show more
Check if the volume is set high enough
Volume will be increased only in receiver mode
Wine of a beautiful volume with a roasted final
