Examples of 'volumetric productivity' in a sentence
Meaning of "volumetric productivity"
volumetric productivity: Volumetric productivity is a term used in various industries, such as manufacturing or energy production, to measure the efficiency of production in terms of volume output per unit of time. It is a key metric in assessing the performance and output of processes or systems
How to use "volumetric productivity" in a sentence
Basic
Advanced
volumetric productivity
Volumetric productivity increased with increasing dilution rates.
Analysis of the data in reference to the volumetric productivity.
Volumetric productivity is improved if the biomass concentration in the reactor is very high.
Optimization of temperature and pH to maximize the volumetric productivity.
The volumetric productivity of this strain was one of the best reported to date.
This is typically referred to as the maximal instantaneous volumetric productivity.
This indicates that the higher volumetric productivity is not due to any integration artefacts.
One technical objective of anthraquinone based oxidizers is to maximize reactor volumetric productivity.
The chart indicates an increase of the volumetric productivity with decreasing temperature.
Maximum volumetric productivity for lactate was estimated from the steepest region of each graph.
The benchmarks that will be described here are the broth titer and the volumetric productivity.
Figure 1 illustrates volumetric productivity as a function of catalyst slurry concentration.
The bioreactor allows a relatively high cell density per unit volume resulting in higher volumetric productivity.
As a result, the volumetric productivity of the process was significantly increased.
It is claimed that these catalysts have a high volumetric productivity ( activity ).
See also
Figure 2 shows how volumetric productivity increases throughout fed-batch culture.
Figure 6 shows a surface plot analysis of the data in reference to the volumetric productivity.
Runs 3 through 7 demonstrate that volumetric productivity increases proportionately with decreasing catalyst porosity.
Moreover, gas holdup can be measured on-line with a much faster response rate than volumetric productivity.
Thus, the increase in the volumetric productivity was the result of the increasing growth rate.
The surface plot supposes a linear correlation between the parameters temperature / pH and the responding volumetric productivity.
Specific productivity was calculated as the quotient of volumetric productivity divided by cell mass at 24 h.
E VP, maximum volumetric productivity during batch fermentation.
The space-time yield is also known as the " volumetric productivity ".
The volumetric productivity P in this experiment was calculated by,.
A further increase of the cell density resulted in a volumetric productivity of over 3000 U / UD.
Thus, the volumetric productivity Q P is the most plausible target for optimization.
Volumetric productivity after 12 days in culture.
The fermentation yielded a volumetric productivity of 1.2 gram calcium propionate per kilogram medium per hour.
Volumetric productivity is reported for the most active 24-h period.
FIG . 2 illustrates reactor volumetric productivity as a function of slurry concentration for a catalyst having a porosity of 40 %.
Volumetric productivity ( units of Factor VIIIIL / day ) in the perfusion bioreactor.
Figure 39 depicts volumetric productivity achieved in each15-L fermentation over time.
Volumetric productivity is reported in gram per liter per hour ( g / L / h ).
Figure 2 illustrates volumetric productivity as a function of catalyst slurry concentration for a catalyst having a porosity of 40 %.
Volumetric productivity ( units of Factor VIII / L / day ) in the perfusion bioreactor.
Isoprene titer, volumetric productivity and cell productivity index were also higher in the GI1.2gltA strain.
Typically, volumetric productivity is expressed as grams glycolic acid / L / h.
Additionally, the volumetric productivity was reduced to approximately 36 % and the specific productivity to 50 %.
The cumulative volumetric productivity for the run described was 24.7 mg AOAC xanthophyll / l-hr.
You'll also be interested in:
Examples of using Volumetric
Show more
Specifications for volumetric and mass flowmeters
Volumetric error limits for repetitive pipette
Clear identification of the volumetric instrument to be tested
Examples of using Productivity
Show more
Relative productivity in manufacturing output per hour
The impact of ICTs on productivity and growth
Productivity growth could also be more inclusive
