Examples of 'vref' in a sentence
Meaning of "vref"
Vref (noun): in aviation, the reference speed used by pilots when approaching to land. It is the speed at which an aircraft should cross the runway threshold
How to use "vref" in a sentence
Basic
Advanced
vref
Vref landing reference speed degrees.
It is therefore possible to reach the voltage VRef after a certain number of burst.
Vref is the reference voltage.
Thus a reduction in Vref implies an increase in gain.
Vref may be fixed close to the switching point of the current pH.
The reference voltage Vref may be suitably selected.
Thus the amplitude of the sawteeth is equal to Vref.
A reference voltage source Vref to normalize the input.
Vref where ka is a known coefficient and Vref is a reference voltage.
Thus the reference voltage Vref is set in the converter.
Vref as well as continuous voltage Va.
The reference voltage source Vref has a low impedance.
Reference voltage Vref is applied to each measurement circuit simultaneously.
This common point supplies the voltage reference Vref.
The voltage Vref is associated with the technology used.
See also
The negative input to the comparator is a reference voltage Vref.
Reference speed Vref used to determine the final result will be.
It is enabled just once per period of the setpoint signal Vref.
In an embodiment the dispatched Vref may different from turbine to turbine.
It will be understood that embodiments are not limited to maintaining Vout at Vref.
A steady voltage is fed in at Vref to provide a reference for the circuit.
The value of this inrush current is fixed by the reference voltage Vref.
It has also to be noted that Vref is specified with respect to ground.
Designates the instant at which the negative peak voltages cross Vref.
The voltage Vref may be for example supplied by a bandgap reference circuit.
Such discharge level depends on the value Vref distributed at such pixel.
The hold signal Vref could also be applied to the column electrodes.
The top end of the delta bug represents the correct Vref speed.
An internal voltage reference Vref is provided for the purpose of voltage compensation.
The amplitude Vp represented is substantially equal to half that of the hold signal Vref.
A desired reference voltage Vref can be provided by employing any conventional circuitry.
This is a notched signal whose period is equal to that of the setpoint signal Vref.
Reducing the voltage Vref decreases the sensitivity threshold of the alarm.
The converse is true if the Vsense voltage is lower than the Vref voltage.
The reference speed Vref for the determination of the final result shall be.
The adjusting operation for the reference voltage Vref is performed by laser trimming.
Vref and the output signal is the voltage Vd across the terminals of the junction.
The polarity of the reference voltage Vref is then to be reversed for all stages.
The first condition limits the input voltages VE as a function of the reference voltage Vref.
The adjusting operation for the reference voltage Vref is performed by a zapping operation.
It is widely used in the prior art and provides a relatively stable reference voltage Vref.
The value of the reference potential Vref is preferably half the power supply potential Vcc.
Vchem has the effect of shifting the switching threshold voltage if Vref is the input.
The reference voltage Vref is a stable scaled representation of the desired regulated output voltage Vout.
An auxiliary low reference potential VRB that is less than Vref but greater than VTprg.
This mode keeps the Vref value for use with the next toner density control.
This means that only one of the two driver arrangements can ever reach Vref.
Where Vref is the reference speed.
The Kalman filter is used for a state vector x which represents the merged reference speed Vref.
Potential Vref close to Vcc will preferably be chosen.
