Examples of 'wall holder' in a sentence
Meaning of "wall holder"
Wall holder refers to an object or device that is specifically designed to hold or support something on a wall. It could be a hook, rack, bracket, or any other structure that provides stability or storage for items hung or mounted on a wall
How to use "wall holder" in a sentence
Basic
Advanced
wall holder
Proceed as follows to mount the wall holder.
The wall holder is designed for screwing to a wall.
The holder can also be used as a wall holder.
Position the wall holder at the required location.
Always ensure correct placement of the wall holder.
The wall holder may be installed in one of two ways.
How to place the unit on the wall holder.
The wall holder is only suitable for storing cartridges.
Dismantling of the secuENTRY keypad from the wall holder.
Press the wall holder firmly against the wall.
Loosen the screw on the cover of the wall holder.
Wall holder and screw the device into place.
Never hang or place the shaver on the wall holder.
Wall holder for ribbed radiator with round water channels.
Then tighten the screw to secure the wall holder.
See also
The slotted holes in the wall holder provide for an exact alignment.
The wall holder can be mounted easily using the enclosed items.
Attachment screw between wall holder and the complete front part.
One is using the enclosed cable tie to install it to a wall holder or a pipe.
Use the corner wall holder as a template for drilling the hole.
Faulty measurements can result when the wall holder slips away.
Never carry the wall holder or the power adapter by the cable.
Four fastening methods are available for fastening the wall holder to different surfaces.
Mount the included wall holder with screws and possibly dowels to a vertical wall.
Secure the data logger to the wall holder with the lock.
The wall holder and the operating mechanism are both provided with an insertion aperture.
A spring is accommodated between the wall holder and the operating mechanism.
Now you can remove the water reservoir from the wall holder.
Spring means are provided between the wall holder and the operating mechanism.
Then use the hook provided to hook the phone into the wall holder.
Plug the outdoor sensor into the wall holder so that it latches.
It also often happens that the operating mechanism becomes jammed in the wall holder.
Slide down and remove the wall holder on the back of the heating control.
Use the mounting kit provided and install the wall holder as shown.
Hang the device on the wall holder and tilt forwards into the safety chains.
The hinge pins can be integral with the wall holder in this case.
Use the wall holder 3 to mark the boreholes.
Insert the pins through the openings in the wall holder as shown in the figure.
Attach the wall holder to a vertical, level wall.
You can conveniently store the other cartridges by attaching them to the wall holder supplied.
Control Switches Control switch on wall holder only for models equipped with a switch.
Select a suitable installation location for the wall holder 3.
Secure the wall holder 4 using the screws.
The black plastic part with the Beurer logo is a magnetic wall holder for wall mounting.
You can also fasten the wall holder to a wall using the double-sid.
Loosen the tension relief turn out 2 screws inside the wall holder.
The front face of the wall holder 1 is largely left open.
The operating mechanism 2 largely encloses the wall holder 1.
You can also fasten the wall holder to a wall using the double-sided adhesive tape.
To the back wall, there is a distance of 14 mm through the wall holder.
You'll also be interested in:
Examples of using Wall
Show more
Our wall has not fallen down
Identify an appropriate wall to fix the machine to
Wall mounting the rear speaker system
Examples of using Holder
Show more
Support file holder on cutter top plate
Holder advertising material itemnumber price per
This battery holder part is not waterproof
