Examples of 'wall of the cylinder' in a sentence
Meaning of "wall of the cylinder"
wall of the cylinder: Refers to the inner surface of a cylinder, often used in engineering or physics contexts
How to use "wall of the cylinder" in a sentence
Basic
Advanced
wall of the cylinder
These radial bores emerge at the wall of the cylinder.
The wall of the cylinder defines a lumen through its centre.
The bullet shall completely penetrate at least one side wall of the cylinder.
The wall of the cylinder receiving the screw has an anular recess.
This prolongation tube has a bottom wall adjacent a bottom wall of the cylinder.
The outer surface of the wall of the cylinder cooperates with the sheet by contact.
The cylinders can be spun cast to form the main circumferential wall of the cylinder.
Only the steel wall of the cylinder separating the combustion chamber from the cooling liquid.
The ring shaped bulge abuts and is biased against the wall of the cylinder bore.
The wall of the cylinder has a thickness of about 2 mm.
By way of example, the finger is secured to an end wall of the cylinder.
By way of example, the outer wall of the cylinder 44 can by circularly cylindrical.
Preferably, the outer circumferential edge is welded to the inner wall of the cylinder 5.
A screw 29 traverses radially the wall of the cylinder 28 to project into the interior.
A driven rod, connected to the piston, extends through a front wall of the cylinder.
See also
The wall of the cylinder 36 along which the piston 38 travels is a smooth wall.
In the illustrated examples, the safety member is provided in a bottom wall of the cylinder.
The wall of the cylinder 34 is transparent under the objective of the write / read head 33.
The ring shaped bulge 5 may also be biased against the wall of the cylinder bore 3.
A suction system 13 is connected to the back wall of the cylinder head 4c of the engine 4.
The electrical resistor 34 is formed by a wire coiled on an outer wall of the cylinder 35.
A cylindrical gap 17 is present between the wall of the cylinder 2 and the liner 16.
The first connecting channel 28 opens advantageously into a first end wall of the cylinder 18.
A channel 11 is provided in the wall of the cylinder.
Furthermore, the axis 57 is eccentric with respect to the outer wall of the cylinder 58.
The oil ring scrapes off oil at the guide wall of the cylinder body 126.
The stop strip 24 is held by a longitudinal aperture 25 penetrating the wall of the cylinder core 5.
An intake pipe 29 is connected to the rear wall of the cylinder head 24.
A channel 24 is formed in the side wall of the cylinder.
The water pump 52 is fixed to a left side wall of the cylinder body 24.
A fuel injection valve 35 is mounted on an upper side wall of the cylinder head 27.
An exhaust pipe 27 is connected with the front wall of the cylinder head 24.
A water pump 94 is mounted on the right side wall of the cylinder head 27.
A water jacket 12 is formed in an upper portion of the wall of the cylinder barrel 57.
The first object 30b includes a lot of serrations 35 on the inner wall of the cylinder object 32.
You'll also be interested in:
Examples of using Wall
Show more
Our wall has not fallen down
Identify an appropriate wall to fix the machine to
Wall mounting the rear speaker system
Examples of using Cylinder
Show more
Outside cylinder condenser no contact with water
Clean the filter cylinder every week
Cylinder locks with custom locking system
