Examples of 'wall studs' in a sentence
Meaning of "wall studs"
Wall studs are the vertical wooden or metal beams within a wall structure that provide support and stability to the framework. They form the skeletal structure of walls, allowing for the attachment of drywall, insulation, or other wall materials
How to use "wall studs" in a sentence
Basic
Advanced
wall studs
Locate and lightly mark wall studs.
Wall studs at both corner holes.
Bracket not secured to rear wall studs.
Locate wall studs on each side.
Nail header plate to the wall studs.
Ensure wall studs are plumb and.
You built your bar from the wall studs up.
Mounting the hood on wall studs or lumbars is highly recommended.
Position the heater on the wall and locate wall studs.
Locate the edges of the wall studs within the cabinet.
Insert mounting screws through bracket and into wall studs.
Use drywall anchors provided if wall studs or framing are not available.
The wall studs can be used for attachment of wall mounting bracket.
Verify that the screws engage the wall studs or framing.
Locate wall studs into which the wall brackets will be installed.
See also
The centre of the vent pipe must be located between wall studs.
The wall studs are crucial to properly support the weight of the cabinets.
Use cleats behind both sides of the support to secure wall studs.
Secure a water heater by strapping it to wall studs and bolting it to the floor.
Make sure you install grab bars solidly on the wall studs.
Locate wall studs so that wall opening will be located between wall studs.
Rear side of the speaker is not blocked by wall studs or other objects.
Find the wall studs and make marks for new screw holes.
These dimensions are the most common size for conventional wall studs.
Locate the edges of the wall studs within the cabinet opening by using.
Construct structural wall framing that is flush with interior surface of wall studs.
Secure the mounting brackets to the wall studs with wood screws provided.
Construct wood wall framing that is flush with interior surface of wall studs.
The hanging brackets must be screwed into wall studs to ensure the installation is secure.
Use this alternative method to secure the refrigerator whenever steel wall studs.
Begin the installation by locating the wall studs on the inside wall of the structure.
They are typically designed with nail or screw holes to attach directly to wall studs.
Begin the installation by locating the wall studs on the side wall of the structure.
Apply adhesive to the back of the panels or onto the wall or wall studs.
Strap your water heater to wall studs and bolt down any gas appliances.
This special mark will make it more convenient to mark off wall studs.
Be sure to drill the hardware into the wall studs if you are mounting a heavy television.
Anchor the OneFlow system on a wall stud or suitable mounting material spanning wall studs.
You will have to screw the unit into the wall studs or use drywall anchors.
The two upper mounting screws must enter the horizontal support or wall studs.
Locate and mark two wall studs against the wall where the refrigerator will be located.
The flue exhaust pipe and inlet air pipe should be located between wall studs.
Wall studs and floor joists are the primary components behind ISF building systems.
Install the remaining screws through the bracket and into the wall studs as required.
Attaches to wall studs on finished or unfinished walls, installation is easy and fast.
Ceramic knobs were cylindrical and generally nailed directly into the wall studs or floor joists.
Fasten 2x4 cleats to wall studs to provide a level surface on which to rest cabinet.
The Hood body should be secured to wall studs.
Secure hood to wall studs whenever possible ; use appropriate wall fasteners & hardware.
If possible, fix the support screws into wall studs.
You'll also be interested in:
Examples of using Studs
Show more
That makes two studs in the house
Ensure studs are inserted into proper location
Check the fastening studs to be sure they
Examples of using Wall
Show more
Our wall has not fallen down
Identify an appropriate wall to fix the machine to
Wall mounting the rear speaker system
