Examples of 'wall thicknesses' in a sentence
Meaning of "wall thicknesses"
Wall thicknesses refer to the measurement of how thick a wall or barrier is. It is commonly used in construction and engineering to ensure structural stability and comply with safety standards. Different buildings or structures may require specific wall thicknesses depending on factors such as the load-bearing capacity and purpose of the wall
How to use "wall thicknesses" in a sentence
Basic
Advanced
wall thicknesses
Edits diameters and wall thicknesses of pipes.
The wall thicknesses are selected for adequate strength.
The ability to achieve variable wall thicknesses.
Tubing wall thicknesses can also vary.
Each kind of load leads to different wall thicknesses.
Wall thicknesses that store heat.
The high stiffness enables lower wall thicknesses.
The wall thicknesses vary accordingly.
The chosen tubes may have wall thicknesses as desired.
These minimum wall thicknesses were listed in a table in the aforementioned paragraph.
Determination of minimum wall thicknesses.
Selection of several wall thicknesses to meet various insulating requirements.
Excellent possibilities of wall thicknesses.
The wall thicknesses can vary widely based on many factors.
Flexibility of the catheter is increased with thinner wall thicknesses.
See also
Lower figures concerning minimum wall thicknesses if austenitic steels are used.
Several wall thicknesses allowing to meet various thermal insulation requirements.
Amendment of the limit values for calculating equivalent wall thicknesses.
Different wall thicknesses can be produced from the same mold.
The other requirements as regards minimum wall thicknesses remain unaffected.
Various shell wall thicknesses may be utilized in the present invention.
They can be installed in various depths of wall thicknesses to maximize space.
Various can body wall thicknesses are shown on the horizontal axis.
It would be advantageous to provide microcapsules of differing dimensions and wall thicknesses.
Variable wall thicknesses.
It is also known to provide plastic panels with uniform wall thicknesses.
Higher figures concerning minimum wall thicknesses if common aluminium alloys are used.
Each type represents a series of sizes with different wall thicknesses.
These wall thicknesses are then employed as a measure of the quality of the bottle.
Conventional designs typically experienced buckling problems at comparable wall thicknesses.
Various shell wall thicknesses can be achieved in accordance with the invention.
A stress analysis shall be performed to justify the minimum design wall thicknesses.
The most likely wall thicknesses are obviously less than those shown.
The following flue manifold sizes are available for different wall thicknesses.
This view shows that the cell wall thicknesses are relatively uniform.
Their wall thicknesses may be the same or they may be chosen to be different.
There was a wide range of cylinders produced with three different wall thicknesses.
Various shell wall thicknesses can be achieved in accordance with present invention.
As a result the gripping device is adaptable to different vessel wall thicknesses or shapes.
The wall thicknesses also change from thicker to thinner moving inwardly.
This may be achieved by using different wall thicknesses for the compartments.
Other wall thicknesses can be employed that will satisfy the strength requirements.
The sizes of the pouches and wall thicknesses of the materials may vary.
Uniform wall thicknesses and outside dimensions and is made in a wide range of specifications.
These membranes can be made with a wide variety of wall thicknesses and morphologies.
In this way still thinner wall thicknesses than those mentioned above may be obtained.
This works best for parts that have fairly consistent wall thicknesses.
No requirements concerning the shell wall thicknesses are prescribed for refrigerated liquefied gases.
The following overview lists all available shell diameters and their wall thicknesses.
Deep drawing allows much thinner wall thicknesses to be produced than a machining operation.
You'll also be interested in:
Examples of using Wall
Show more
Our wall has not fallen down
Identify an appropriate wall to fix the machine to
Wall mounting the rear speaker system
Examples of using Thicknesses
Show more
Greater layer thicknesses are poured in several layers
Do not attempt to cut panels of thicknesses that
Other layer thicknesses are possible upon request
