Examples of 'water aspirator' in a sentence
Meaning of "water aspirator"
water aspirator: A water aspirator is a device used in laboratories to create a vacuum by flowing water through a vacuum system. It is commonly utilized for tasks such as filtration or suction in scientific experiments
How to use "water aspirator" in a sentence
Basic
Advanced
water aspirator
The vacuum came from a water aspirator.
Water aspirator vacuum was applied.
Collect product by vacuum distillation using a water aspirator.
Then use the water aspirator to clean up the sewage on the floor.
The filtrate was dried under water aspirator vacuum.
Water aspirator Shared 2 per bench.
Typically the vacuum is generated by a water aspirator or a membrane pump.
The solvent was removed by distillation under reduced pressure provided by a water aspirator.
The solution was distilled under a water aspirator vacuum to near dryness.
The solution is boiled at reduced pressure with the use of a water aspirator.
A vacuum is applied usually via a water aspirator via the vacuum inlet.
Concentration under reduced pressure is performed with a rotary evaporator using a water aspirator.
The filtrate was distilled using water aspirator vacuum to remove excess alkene.
The volatile material was removed on the rotary evaporator at water aspirator pressure.
The flask was evacuated using a water aspirator and then filled with hydrogen from a balloon.
See also
The water is gently removed from the silica using a water aspirator vacuum.
After the distillation had subsided, a water aspirator vacuum was applied to remove the water remaining.
The partial vacuum may be imparted through the action of a mechanical device or water aspirator.
The filtrate was distilled applying water aspirator vacuum to remove excess 1-heptene.
These particles are washed with water several times and dried at the water aspirator.
The solution was distilled under a water aspirator vacuum to 150 mL once more.
The aqueous mixture was allowed to cool and then filtered by suction from a water aspirator.
The term " concentrated " refers to removal of solvent at water aspirator pressure on a rotary evaporator.
The resulting solution was concentrated to dryness under reduced pressure at 45°C using a water aspirator.
The vacuum source was a water aspirator and the bath temperature did not exceed 30°C.
Excess alkene was distilled off using water aspirator vacuum.
After one hour, water aspirator vacuum was applied and the reaction temperature was raised to 120°C.
Solutions were concentrated by use of a rotoevaporator under water aspirator pressure at ambient temperature.
The green powder was then collected on a Buchner funnel using a water aspirator.
The vacuum source for the evaporator was a water aspirator and the bath temperature was 30°C.
After about ten minutes, the flask was closed and evacuated vía the water aspirator.
Solutions were concentrated by use of a rotary evaporator under water aspirator pressure at ambient temperature.
The product receiver was evacuated to a vacuum of 30 " Hg using a water aspirator.
Remove settled top layer containing water and methanol with a water aspirator and glass pipette.
The resulting clear yellow filtrate was evaporated to a syrup at 50°C under water aspirator vacuum.
The mixture was heated 4 hours at reflux and then concentrated at 50°C using a water aspirator.
The filtrate was concentrated in vacuo at 30 to 35°C under water aspirator pressure.
You'll also be interested in:
Examples of using Water
Show more
There is no water damage or fire extinguisher residue
Do not clean the engine with water
Water freezing in the system will break it
Examples of using Aspirator
Show more
How to choose an aspirator for the newborn
Thin it out with the suction aspirator
Preparing the aspirator for wet vacuum cleaning
