Examples of 'weight parts' in a sentence
Meaning of "weight parts"
weight parts ~ components or elements that add weight to an object or structure, often used in engineering or manufacturing contexts
How to use "weight parts" in a sentence
Basic
Advanced
weight parts
The parts mean weight parts.
Amounts are in weight parts or weight percentages unless otherwise indicated.
The parts in examples all mean weight parts.
Divide the number of weight parts by the respective density.
All the parts in the following examples are weight parts.
Weight parts of maleic anhydride was then added to the heated asphalt.
The parts by weight per hundred weight parts polyol is referred to as pphp.
The weight parts of the rubber latices are based on the solid content.
This results in raw material cost savings and lighter weight parts.
Parts by weight per hundred weight parts of the polyol formulation is abbreviated pphp.
All concentrations of the test substance are expressed as weight by weight parts per million.
In some cases the weight parts per million alkali metal and crystallization rate were determined.
There is an occasional requirement to lift medium weight parts during repairs and overhauls.
Weight parts of PPTA were dosed into the twin screw extruder.
Determine wt % based relative to total weight parts of polystyrene.
See also
Weight parts of an edible viscous liquid ;.
Pphp - parts by weight per hundred weight parts of the polyol formulation.
About 9 weight parts of butyl benzyl phthalate was added to the heated asphalt.
A lathering skin cleansing bar composition comprising b y weight parts of the bar composition,.
Ninety-five weight parts of this mixture are placed into a container.
Hence, pphp is the parts by weight per hundred weight parts of the polyol formulation.
Amounts are in weight parts or weight percentages unless otherwise indicated . TESTING.
The sweetener exhibits the obesity preventing effect with a psicose content of 10 weight parts or more.
Recently, demand for light weight parts increases in particular in the automobile industry.
The preferred amount of additives is about 2 to about 25 weight parts.
The values in Table 1 are weight parts or dry parts by weight.
To 5 weight parts light stabilizer and / or ultraviolet absorber.
A reactor was charged with 100 weight parts of the alkaline cellulose.
Two weight parts of dibenzosuberone ( sensitizer ) was also added thereto.
By " pph " is meant herein weight parts per hundred weight parts.
For a fluoride type flux, a suitable lower limit is 5 weight parts.
Amounts are in weight parts or weight percentages unless otherwise indicated . Example 1.
The crosslinking monomer is used in each experiment at 2.0 weight parts in the premix.
Wppm = weight parts per million.
The balance of methanol and dimethyl ether will be to make 100 weight parts.
Typically, from 5 to 50 weight parts of solvent are employed per weight part of propylene.
Therefore, the upper limit of the preferable content of potter 's clay is 30 weight parts.
An effective amount up to 7 weight parts of a humectant-dispersing agent for said edible gum ;.
On the other hand, the roll processability in fact deteriorates in excess of 30 weight parts.
The term " phr " means, weight parts per hundred weight parts of polymer.
Coating Combine equal weight parts of,.
Parts and % mean weight parts and weight %, respectively unless otherwise specified.
The stocks in Table I are identified on the basis of 100 weight parts of rubber.
From 1 to about 4 weight parts of a calcium ion source for setting said gum and.
The preferred amount of additives is 2 to 25 weight parts.
The term " pphp " means weight parts per hundred weight parts of the polyol.
The preferable content of antislipping agent is 15 to 35 weight parts.
Generally, the elastomer solution has 1 to 20 weight parts of solvent for each part of elastomer.
To 10 weight parts organotitanium compound ; and.
Preferable blend ratio is of 12 to 30 weight parts of polymer precursor.
