Examples of 'weight solids' in a sentence
Meaning of "weight solids"
Weight solids: The term weight solids refers to the amount of solid material present in a solution or mixture, typically expressed as a percentage of the total weight of the solution
How to use "weight solids" in a sentence
Basic
Advanced
weight solids
Percent volume solids are not the same as percent weight solids.
Percent weight solids are the amount of paint per unit weight that is nonvolatile.
The fiber additives were incorporated into the granules at 25 percent by weight solids.
Higher molecular weight solids are less volatile as compared to low-molecular-weight polymeric binders.
The filtered resin was then vacuum stripped to a total weight solids of 99 percent.
The calculated weight solids of each of the above compositions was 70 %.
The coating films are then re-weighed to determine and report total weight solids retention.
The 23 % by weight solids concentration was determined using a hand held refractometer.
The final average percent weight solids was 5 %.
The solution weight solids were reduced to 9 % with the addition of more xylene.
The examples were prepared in toluene at approximately 50 % by weight solids.
Optionally, the weight solids percentage of the coating composition can be greater than 60 %.
The product was a translucent dispersion with a weight solids content of 50 %.
Weight solids ( % by weight ) of a material in suspension.
The resulting polymer composition had a weight solids content of 56 %.
See also
The weight solids are 55 % and Gardner viscosity is Y.
Preferably the above diethyl phthalate comprises about 18 % by weight solids.
The pigment dispersion contained 14 % by weight solids and was obtained from American Hoechst Co.
The result was a translucent dispersion of polymer particles of weight solids content 52 %.
The resulting polymer solution has weight solids of 60 % and Gardner Holdt viscosity of Z1.
The coating composition preferably comprises more than 60 % by weight solids.
The second group of fractions was concentrated to 10 % by weight solids for the isomerization step.
The discharge slurry was thickened, yielding a thickener underflow slurry containing 60 % by weight solids.
Preferably for use the suspension was diluted to 2.5 % by weight solids with odourless kerosene . Example 2.
For instance, a typical binder for injection molding ceramics can accept about 50 percent by weight solids.
The dry powder is dispersed into DI water at 1 % by weight solids to form a re-dispersion.
ULTRAPAQUE is commercially available as a slurry containing approximately 40 % by weight solids.
The solution was dissolved to 14 % by weight solids in xylene.
Extract concentrations are typically in the range of from 10 to 30 % by weight solids.
The product was a translucent dispersion of polymer particles of weight solids content 52 %.
A process as claimed in claim 33, wherein the composition comprises at least 35 % by weight solids.
First, the latex polymers of these examples were diluted to 33 % by weight solids with water.
The resulting, two-phase solution has a pH of approximately 7 at about 36 % by weight solids.
ULTRAPAQUE ® is commercially available as a slurry containing approximately 40 % by weight solids or as a dry powder.
The method of claim 1 in which the first organic phase includes 5 to 50 % weight solids.
Preferably, the dispersion of UF polymer particles is prepared at about a 40 % by weight solids concentration.
The absorbent material of claim 16 wherein diethyl phthalate comprises about 18 % by weight solids.
Froth flotation is conducted below 40 % by weight solids.
The concentration of the dispersion was 1.3 % by weight solids.
All coatings were applied at 35 % weight solids.
These coatings typically contain up to about 25 %, by weight solids.
The final composition was 30 % by weight solids.
As formulated, the paint concentrate contained 32 % by weight solids.
The solution was then diluted with water to 20 % by weight solids.
The concentrate of the final slurry is about 40 % by weight solids.
Polymer preparation, Selected commercially available and proprietary polymers were diluted to 23.5 % weight solids in water.
You'll also be interested in:
Examples of using Solids
Show more
The solids feared our metamorphic abilities
A sieve separates solids from used liquids
Solids liable to become liquid during transport
Examples of using Weight
Show more
Height and weight are about the same
Weight sizing for apples and pears
I lost some weight and changed my name
