Examples of 'weld metal' in a sentence
Meaning of "weld metal"
weld metal - refers to the metal that is melted and fused together during the process of welding
How to use "weld metal" in a sentence
Basic
Advanced
weld metal
To check the soundness of the weld metal.
All weld metal test specimen.
The same applies to the weld metal.
The strength of weld metal is customarily.
High penetration of the weld metal.
In the weld metal the corrosion assumed an interdendritic form.
Effect of molybdenum on weld metal microstructure.
Hydrogen has a high solubility in molten weld metal.
A technique of depositing weld metal in which the electrode is oscillated.
Nitrogen may cause porosity in the weld metal.
Weld metal analysis.
Higher toughness of the weld metal.
Low alloy steel weld metal and flux cored wire.
Solidification segregation occurs in weld metal.
The weld metal is rapidly cooled after being molten by laser welding.
See also
Ww indicates a width of the weld metal.
Contraction of weld metal during welding that forces base metal to move.
Slag with small holes penetrating to the weld metal.
Weld metal melting through base metal and hanging underneath weld.
No cracking in the weld metal.
Failure of weld metal to fuse completely with base metal or a proceeding weld bead.
A crack occurs easier as hardness of the weld metal is large.
The surface excess weld metal heights of the produced welded joints were measured.
They can also be used to cut and weld metal.
The chemistry of the weld metal was substantially the same as the base metal.
Small cavities or holes resulting from gas pockets in weld metal.
The amount of diffusible hydrogen contained in weld metal was measured in a manner as follows.
The welding material melts during welding to form a weld metal.
Weld metal that is not parallel and does not cover joint formed by base metal.
The welded joint includes a base material and a weld metal.
The flux cleans weld metal and can also modify its chemical composition.
The arc can be used to fuse or weld metal pieces together.
This decreases the hydrogen embrittlement resistance of the weld metal.
The first layer of the weld metal preferably has the chemical composition described below.
The dabber variation is used to precisely place weld metal on thin edges.
The width Ww of weld metal was obtained in a manner as follows.
Aluminium welding is very sensitive to the onset of pores in the weld metal.
When welding atomic hydrogen diffuses into the weld metal and the heat affected zone.
The used test methods are validated for the characterization of weld metal.
A metallographic structure of weld metal was observed by a SEM.
P further increases the solidification crack sensitivity during welding in the weld metal.
I hired Ross to weld metal together.
Reduction of carbon content in structural steels has a beneficial effect on weld metal properties.
The balance of weld metal is Fe and incidental impurities.
The problem is complicated further by the need to achieved certain weld metal properties.
The balance of the weld metal of the present embodiment is Fe and impurities.
Carbon equivalent formulae used to represent the hardening capacity of steel and weld metal.
Weld metal and HAZ.
When there is a gas problem the result is usually porosity within the weld metal.
How to learn to weld metal with an inverter?
You'll also be interested in:
Examples of using Metal
Show more
But there is metal in the electrolyte regulators
It sounds like a wheelchair going down a metal staircase
Plastic or metal foil vent is not recommended
Examples of using Weld
Show more
Do not weld with worn or loose wires
This contamination could weaken the weld
Weld bead does not penetrate base metal
