Examples of 'weldability' in a sentence
Meaning of "weldability"
weldability (noun) - the ability of a material to be welded under certain conditions
Show more definitions
- The ability of a metal or other material to be welded under specified conditions
How to use "weldability" in a sentence
Basic
Advanced
weldability
Good weldability and resistance to intergranular corrosion.
This steel also has good weldability.
Superior weldability on construction steels and alloys.
This results in an undesirable deterioration in the weldability.
But the weldability needs to be further improved.
Silicon contributes to a good weldability and castability.
This leads to a deterioration in performances such as weldability.
Best weldability ensures maximum tightness.
Corrosion resistance while maintaining good weldability.
Weldability is also studied in a much more objective fashion.
Steel having improved weldability and method thereof.
Weldability being an unsuitable criterion to determine the product scope.
Observation on some weldability tests and their use.
Weldability assessed from the effect of mechanical stresses.
These grades differ in weldability and notch toughness.
See also
Weldability assessed from the point of view of technique.
This is because spot weldability is dependent on this thickness.
The effects of heat input on weldability.
Good weldability and good coatability.
Many of these steels have problems with weldability.
Spot weldability was evaluated by performing a continuous dotting test.
Zr also improves the weldability of the cast product.
The weldability was tested by two methods.
Too much boron may lead to weldability problems.
S reduces weldability and workability of steel.
The maximum of the claimed range is related to weldability.
Quard shows good weldability due to low carbon equivalent.
Almost all stainless steel has good weldability.
The weldability is also reduced.
This provides desirable weldability for the next step.
Its weldability is not good.
These surface improvements significantly reduce weldability of the material.
In particular weldability becomes a concern.
Low carbon content may also improve the weldability.
To this end two cold weldability tests have been introduced.
The weldability of an aluminium plate improves when it is slightly warmed.
For the condition ii the weldability range is extremely small.
Good weldability constitutes an important property for the material.
Practical consequences of these data on the weldability of steels are discussed.
Spot weldability was evaluated as follows.
S deteriorates the hot workability and weldability of the steel.
Good weldability and.
Al is a component that causes defective welding and reduces weldability.
The castability and weldability of bismuth brass alloy is bad.
Tinplate is characterised by its excellent corrosion resistance and weldability.
The reference does not refer to the weldability of elastomeric materials.
This requires that the alloys have excellent weldability.
The weldability was reduced.
Mn further improves the workability and weldability of the steel.
Ductility and weldability of steel decrease with increasing percent of carbon.
