Examples of 'welding speed' in a sentence
Meaning of "welding speed"
welding speed: This phrase refers to the rate at which a welding process takes place, indicating how fast or slow the metal is being fused together
How to use "welding speed" in a sentence
Basic
Advanced
welding speed
High productivity due to high welding speed.
Preferably the welding speed is chosen as welding parameter.
This welding parameter is preferably the welding speed.
In favourable cases the welding speed may even be nearly doubled.
This has a favourable effect on the welding speed.
The welding speed is fast and the welding is tight and firm.
Enormous heating capacity and therefore high welding speed.
The welding speed and tool rotation speed were maintained constant in continuous service.
This facilitates substantial increases in welding speed and penetration.
Ness of sheet and welding speed and operation custom of the operator should be also.
Arc length is too short and welding speed is too fast.
Specifically designed cyclinder ensures stable air pressure and welding speed.
High frequency arc is suitable for high welding speed to improve the productivity.
The choice of electrode and welding position also determine the welding speed.
The welding speed along the joint is also increased over prior art welding processes.
See also
The welding in continuous mode showed a much higher welding speed to pulsed mode.
WiseFusion increases the welding speed and penetration and decreases heat input.
This results in shallow penetration and only allows a relatively slow welding speed.
The welding speed is VFD control.
The wire feeding speed was controlled by changing the welding current and welding speed.
The corresponding welding speed is proportional to the reciprocal value of a9n.
The invention allows for higher deposition rates without increasing the welding speed.
The welding speed for the beads in the layer is therefore,.
In addition, the welding latitude increases if the welding speed is reduced.
Since the welding speed was low, the welding amount became extremely large, causing hot cracking.
Better productivity as a consequence of higher welding speed and / or greater deposition rate.
In addition, such additions of gas may improve the productivity by increasing the welding speed.
Said depositing occurs at a welding speed of at least about 2 m / min ;.
Method according to Patent Claim 5, characterized in that the welding parameter is the welding speed.
Welding speed fast, depth more, small deformation, can welding refractory materials.
The number of pulses per second, pulse overlap and welding speed also define a seam weld.
A welding speed v2m corresponds to the mean value R2m.
The joint is realised as a plain butt weld at a welding speed of 4 m / min.
In Fig . 9 the welding speed is shown as a function of the joint portions.
However, until now, the TIG process has been limited by its welding speed.
The welding speed was 3 m / min.
Laser pulse rate and linear welding speed determine welding pitch 32 of welded seam 34.
You'll also be interested in:
Examples of using Welding
Show more
The welding process in case of metal containers
Effective removal of welding fumes and dust
Welding sparks can cause fire or explosion
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
