Examples of 'were heat' in a sentence
Meaning of "were heat"
This phrase seems to be incomplete or unclear; it does not convey a specific meaning in English
How to use "were heat" in a sentence
Basic
Advanced
were heat
The solution filled vials were heat sterilized.
They were heat denatured before being added to the hybridization solutions.
The solution filled vials were heat sterlized.
Those were heat seekers.
After cooling the packages were heat sealed.
All the webs were heat embossed with a conventional bonding pattern.
None of the samples were heat treated.
Individual rolls were heat set and cleaned in a small recirculated oven.
None of these samples were heat treated.
Será were heat inactivated.
The most important safety risks associated with these mechanisms were heat generation and gas formation.
The plastic bags were heat sealed and the packets were heat pasteurized.
The spun fibers were not drawn, but they were heat set.
All other components were heat sterilised in the fermenter.
To avoid complement-mediated bacterial killing, immune será were heat inactivated.
See also
For this check the specimens were heat treated in a cylindrical enclosure.
Approximately 1 g of each formulation was filled into soft gelatin capsules, which were heat sealed.
The webs were heat sealed together outside the periphery of the dressing.
Digests were allowed to proceed for four hours and were heat killed for 20 minutes.
The components were heat treated for one hour in air immediately following the compaction step.
The resultant emulsions were dispersed and sealed 20 ml glass vials which were heat sterilized.
These wells were heat sealed by a PET laminated aluminum foil.
The substrates listed in Table 3 were heat sealed.
All 3 layers were heat bonded to each other.
Were heat treated in accordance with Table 3 below.
The dispersions of liposomes were heat sterilized and characterized as follows,.
A total of 2 x 10 ⁶ counts was added to each hybridization bag and the bags were heat sealed.
All samples were heat treatable, chemically resistant and durable.
The pairs of tensile specimens of Example 3 were heat treated in three groups.
Both starches were heat treated using the . same conditions.
Immediately after enzyme treatment, the samples were heat treated 15 min.
Although the column walls were heat traced and insulated, some heat losses were encountered.
They were drained for 2-3 minutes, then packed in 3 mil polyethylene bags which were heat sealed.
After compaction the parts were heat treated in a two-step heat treatment.
The paint samples along with a negative control ( no biocide ) were heat aged at 45°C.
The wool samples were heat treated as described in Table 2.
At the temperature of 190°C, sutures near the knots were heat fused and fixed.
The cultures were heat inactivated in the manner described in Example 5.
Especially if they were heat damaged??
The dried fibers were heat treated under the specifications mentioned in Table 1.
Step 403, the bamboo strips formed with the slots were heat treated at high temperature.
The two webs were heat sealed together around the periphery of dressing 22.
Heat inactivation / storage, Immediately after enzyme treatment, the samples were heat treated 15 min.
Two resulting representative lenses were heat treated and tested in the manner described in Example 1.
Samples were heat denatured at 100°C for 2 minutes then rapidly cooled on ice prior to electrophoresis.
Five batches were heat treated,.
Samples were heat denatured at 94 ° C for 5 minutes prior to cycling.
At this stage the ends 91,92 of the tubing were heat sealed under a slight positive pressure.
All será were heat inactivated for 1 hour at 56°C prior to use.
Bags containing the filters and scintillant were heat sealed and counted by a Betaplate ™ 1204 beta counter.
You'll also be interested in:
Examples of using Heat
Show more
Use heat resistant plastic or wooden utensils
The room has a heat recovery system
Heat oils slowly on low or medium settings
