Examples of 'wheel by' in a sentence
Meaning of "wheel by"
Wheel by - This could mean to move or progress using a wheel, or to create or design something specifically for a wheel
How to use "wheel by" in a sentence
Basic
Advanced
wheel by
Turn wheel by hand to ensure it is properly centered.
I will ride the ferris wheel by myself.
Rotate wheel by hand to be sure it turns freely.
Excitation of the valve of this wheel by the antenna.
Turn wheel by hand to verify maximum cutting capacity.
Remove ice dispensing wheel by lifting straight out.
The wheel by itself is completely useless.
To transmit torque with the slow wheel by adhesion.
I went section of wheel by section of wheel from start to finish.
It should be possible to rotate the nylon roller wheel by hand.
Remove left rear wheel by removing hub bolts.
Lester spent the winter building the wheel by hand.
Check the wheel by spinning it manually.
Brawny fiber one wheel by 심마루.
Remove the wheel by popping of the hub cap and.
See also
Rotation is imparted to the fan wheel by an electric motor.
Dress the wheel by moving the dresser back and forth.
You should not be able to turn the wheel by hand.
Engage the cutting wheel by tilting the lever upwards.
You could not even turn the wheel by hand.
Turn the upper wheel by hand while backing up the.
The first pin advances the program wheel by one division.
Do not stop the wheel by lateral pressure on the disc.
The temptation is therefore great to be distracted at the wheel by other activities.
Sew turning hand wheel by hand until the pearl.
Wheel by hand.
Install new chain or wheel by slipping chain around axle.
Do not worry you will have your new wheel by Tuesday.
Turn the band saw wheel by hand in a clockwise direction.
This avoids the need to transfer power to wheel by some other means.
Do not reinvent the wheel by trying to establish a new technique.
Separate the gobo plate away from the gobo wheel by pushing it toward.
Turn hand wheel by hand so needle enters the second hole.
Process and device for braking a wheel by integrated pressure pulses.
Remove the wheel by carefully prizing free the wheel brackets using.
Place the track on the rear drive wheel by hand if possible.
Reverse the hand wheel by one quarter turn and lock the tailstock spindle.
Remove the hub from the front wheel by the transmis.
Then fix a steering wheel by means of strong clips specially developed for this purpose.
Do not reduce the speed of the grinding wheel by pressing on the sides.
Fit the new cutting wheel by following the above procedures in reverse and then tighten.
The master cylinder is connected to each wheel by metal tubes full of liquid.
Turn the wheel by hand and then press on START key.
The drive unit drives the ground wheel by means of a roller chain.
Remove wheel by sliding out quick-release axle from axle bracket.
There is no need of reinventing the wheel by producing another code of conduct.
An electric motor that assists steering of the steering wheel by a driver ;.
There is no need of reinventing the wheel by producing another code of conduit.
Replace the wheel by turning the lug nuts in a clockwise direction, in an alternating pattern.
This also releases the aperture wheel by pressing on the ledge underneath.
You'll also be interested in:
Examples of using Wheel
Show more
The tiny wheel actually does have chores
He could barely see over the wheel
Wheel bearings are clean and free of moisture
