Examples of 'wheel guard' in a sentence
Meaning of "wheel guard"
A wheel guard is a protective device designed to cover or enclose a wheel. It is commonly used in machinery, vehicles, and equipment to prevent accidents or injuries caused by the rotating wheel. The guard is typically made of sturdy materials like metal or plastic and is securely attached to the wheel or its surrounding structure
How to use "wheel guard" in a sentence
Basic
Advanced
wheel guard
Then rotate the wheel guard to such an.
Wheel guard must be attached when using disc.
Loosen the lever on the wheel guard.
Adjustable wheel guard for multiple positions.
Always use appropriate size wheel guard.
The wheel guard requires no tools for adjustment.
Fitting and adjusting the wheel guard.
Use a wheel guard with a specific shape according to.
Tighten the lever to fasten the wheel guard.
Use wheel guard with disc grinding wheels.
Remove the outside cover of the wheel guard.
Be sure that wheel guard is in place for cutting.
Mounting flaring cup wheel guard.
The wheel guard must be adjusted on the tool so.
Place the grinding wheel guard over the spindle.
See also
Wheel guard for added safety.
Always install the wheel guard before installing the.
Wheel guard may not be used for most sanding.
For tool with locking screw type wheel guard.
Rotate the wheel guard to the desired position.
Remove or unlatch and pivot away wheel guard cover.
The wheel guard must be fitted on the tool so that.
For tool with clamp lever type wheel guard.
Mount the wheel guard with the protrusions on the.
Apter as this machine is not fitted with a wheel guard.
Rotate the wheel guard to the necessary operating position.
The wheel rotates when the wheel guard is open.
Do not use a wheel guard that has been subjected to a wheel failure.
Remove the bolt from the top of the wheel guard.
Always place the wheel guard in the correct location as shown.
Tighten to secure the spark deflector onto the wheel guard.
Then tighten the wheel guard with fastening the screw.
Position the spark deflector at the top of the wheel guard.
Never place the wheel guard so that it is in front of the grinder.
Loosen the screw on the collar of the wheel guard with a screwdriver.
Always reinstall wheel guard when converting back to grinding operations.
Check that the knob used to secure the wheel guard is tight.
Keep the lower wheel guard attached and working properly.
Trailer through the holes in the fabric into the wheel guard.
Tough steel wheel guard protects operator from the wheel.
The machine may be delivered with the wheel guard mounted at the factory.
Check wheel guard for proper closing before each use.
Diagram of wheel guard.
Wheel guard with cutting and chasing guide for processing stone.
Always lower the wheel guard after replacing the wheel.
Wheel guard must be used when sander is converted for grinding operations.
Escape wheel guard.
The wheel guard must be used with a dry diamond cutting wheel.
Never clamp or tie the wheel guard into the open position.
Fit wheel guard before working with the cutting or grinding disc.
You'll also be interested in:
Examples of using Guard
Show more
Lift both guard barriers to their up locked po
It says there is an armed guard in the hull
Guard protects hand from the blades
Examples of using Wheel
Show more
The tiny wheel actually does have chores
He could barely see over the wheel
Wheel bearings are clean and free of moisture
