Examples of 'wheel must' in a sentence
Meaning of "wheel must"
In the context of a machine or vehicle, 'wheel must' refers to the necessity of a wheel to be in proper working condition or to function properly
How to use "wheel must" in a sentence
Basic
Advanced
wheel must
The cutting wheel must rotate smoothly.
Wheel must be dry to do this test.
That steering wheel must have crushed him.
A wheel must also be rebalanced when a new tyre is fitted.
The movement of the wheel must be very precise.
The wheel must have been fixed.
A deformed or cracked wheel must be replaced.
The wheel must not stand still.
The diamond cutting wheel must be.
Bottom of wheel must not project beyond guard.
The characteristics which a good wheel must have are numerous.
The wheel must not be removed during repair.
They reasoned that first the wheel must become detachable.
The wheel must not be skewed.
If one wheel is frozen then the other wheel must be played.
See also
The grinding wheel must match the machine.
The permissible rotational speed specified on the grinding wheel must be equal to or.
The wheel must be turned to open the door.
While driving on a straight road your steering wheel must appear perfectly straight.
That wheel must be heavy.
The different hole pattern for direct mounting of the fifth wheel must be observed.
A temporary spare wheel must not be used permanently.
Wheel must be dry when applying this test or the sound will be deadened.
The mounted diamond wheel must be able to rotate freely.
The wheel must carry on turning round several times before stopping.
The clamping action of a correctly secured wheel must emboss the surfaces of the dropouts.
The wheel must be changed.
In this case, the drive wheel must be replaced.
The wheel must turn to activate the speed sensor.
A Lawyer and a wagon wheel must be well greased.
This wheel must be turned only in the direction of the arrow.
Only the greater Wheel must move and turn.
The wheel must be slid over the end of the axle.
For a vehicle to turn smoothly, each wheel must follow a different circle.
The wheel must be stuck.
Specifically, the position of the steering wheel must be known at all times i . e.
The tension wheel must not be cleaned while it is rotating.
Since the half shafts are locked together, one wheel must scrub.
The cutting wheel must have a clean cutting edge.
If you notice deep wear marks on the teeth, the chain wheel must be replaced.
The surface of the wheel must be cleaned of possible contaminants.
For tilling, the depth stake must be lowered and the wheel must be raised.
The grinding wheel must lay flat on the supporting flange.
With the drive control engaged, the friction wheel must contact the drive plate.
The diamond wheel must not be in contact with the wall.
The devastation caused by carelessness, recklessness and impaired judgment behind the wheel must be curtailed.
The steering wheel must be in the centre position for this.
For drilling / percussion drilling with large drill bits the torque setting wheel must be set to.
The grinding wheel must lie flat on the supporting flange.
Before running, jogging or walking fast, a separate jogging wheel must.
