Examples of 'when the rotor' in a sentence
Meaning of "when the rotor"
The phrase 'when the rotor' typically refers to a specific moment or condition related to the rotation or movement of a rotor, which can be found in various mechanical systems and devices. It suggests that the subsequent events or actions mentioned in the context are dependent on or triggered by the occurrence or state of the rotor
How to use "when the rotor" in a sentence
Basic
Advanced
when the rotor
The eccentricity varies when the rotor is rotating.
When the rotor is stopped the stator field is immobile.
Others reduce friction when the rotor turns.
When the rotor is rotated relative to the annulus the individual chambers vary in volume.
Open the lid only when the rotor is at a standstill.
The fluid streams through this element to be accelerated when the rotor is in rotation.
Recovery is complete when the rotor disc reaches the upwind part of the vortex.
The pistons therefore move radially when the rotor turns.
When the rotor rotates a respective resistance is produced which makes itself felt as a braking torque.
This model was destroyed when the rotor broke off.
When the rotor rotates, the inactive coil serves as a sensor.
Queries and settings are only possible when the rotor is at a standstill.
When the rotor is at a standstill, the following program locks can be set.
The lid can be opened only when the rotor is stopped.
When the rotor is rotated, it rolls around the inside surface of the hole.
See also
The eccentricity remains constant even when the rotor is rotating.
When the rotor advanced, an entirely new path was defined for each letter.
The opening of the gap is adjusted when the rotor is stationary.
When the rotor is not driven in rotation, the abutment is in the engagement position.
Due to these indentations cavitations are created when the rotor is activated.
When the rotor is rotating, the permanent magnets pass opposite the coils.
It can therefore be utilised when the rotor comprises only one impeller.
The stator comprises a wall section along which the shroud moves when the rotor is turning.
This may be particularly true when the rotor discs are made of carbon materials.
There is little limitation of the resistant torque C when the rotor is hot.
This machine becomes a generator when the rotor rotates faster than the stator magnetic field.
These coils and magnets influence each other when the rotor revolves.
When the rotor blade enters a wake it is exposed to a step-like shearing force.
The optical signal can be switched on or off when the rotor is at a standstill.
The vibrations resulted when the rotor shafts were moved 17 degrees forward from vertical.
They press the sealing unit inwards when the rotor moves.
When the rotor spins, centrifugal force forces the air out the holes.
Lessening of the centrifugal force occurs when the rotor is in a stage of stopping rotation.
When the rotor continues to change, the gas is discharged out of the vacuum pump.
A corresponding air circulation occurs when the rotor is rotating in the opposite direction.
When the rotor possesses a symmetry-axis, it usually coincides with one of the principal axes.
It is only possible to enter the rotor type when the rotor has stopped.
When the rotor assembly rotates, the toy ascends and the fuselage counter-rotates.
The chamber can be accessible only when the rotor has come to a complete stop.
When the rotor is cross-shaped with two pole pairs, the poles are alternately magnetised.
The helicopter lifts off the ground when the rotor head reaches a suitable speed.
When the rotor turns, the tubes.
Severe damage to the device and lab when the rotor broke loose while spinning.
When the rotor slows, due to a higher resistant torque, this voltage reduces.
Perform a MAINS RESET when the rotor has been stationary.
When the rotor chamber is at a pressure lower than external ambient pressure, valve 30 opens.
Maximum precompression is effected when the rotor I rotates by half a turn.
By contrast, when the rotor is off, the transistors are constantly controlled in a non-uniform way.
Figure 7 illustrates operation when the rotor is locked at start.
When the rotor 15 has completed its step, it therefore occupies its second rest position.
You'll also be interested in:
Examples of using Rotor
Show more
The rotor is blocked or the differential pressure
Set the tail rotor trim to centre
The rotor blades are made of laminated rubber
Examples of using When
Show more
Louis did it for free when he fixed my tattoo
When you deposit tuppence in a bank account
Some people laugh when they are drunk
