Examples of 'when tool' in a sentence
Meaning of "when tool"
when tool: It refers to a specific time or situation when a tool is being used or needed
How to use "when tool" in a sentence
Basic
Advanced
when tool
Switch between modes when tool is at a standstill.
Always wear suitable hearing protection when tool.
Are made or when tool is not in use.
The receptacle is energized when the vacuum is on or when tool control is active.
Only when tool comes to a complete stop it is safe to put it down.
Disconnect air hose when tool is not in use.
When tool is used outdoors, use only extension cords in.
Only turn laser beam on when tool is on workpiece.
When tool is used outdoor, only use an extension cable that.
Strong vibrations when tool is switched on.
The vent knob and air exhaust hole must be positioned upward when tool is operated.
Air leaks at cap when tool is connected to air.
Operator common sense and alertness at all times when tool is being used.
There was a time when tool use was thought to be a uniquely human skill.
Only hold plastic handle when tool is in use.
See also
Air leaks around nose when tool is in actuated position Driver blade in down position.
Do not try to change gears when tool is running.
When tool is not in actual use, the chisel must be removed.
Keep trigger depressed when tool is not in use.
When tool is not in use, store in a clean dry environment free of debris.
Automatic throttling when tool is engaged.
When tool retraction is complete, the lower tools are raised to support the web.
Change direction of rotation only when tool is at a complete standstill.
When tool is used outdoors, use only extension cords intended for outdoor use.
Only turn laser beam on when tool is on work piece.
When tool is free, place switch handle in OFF then FOR position to advance cable.
Protects motor from damage when tool is overloaded without.
Similarly, when tool resistance increases, the end point phase shift decreases.
Always switch to a fresh battery when tool performance begins to diminish.
When tool assembly 504 is in the approximated position FIG.
Tube should not be extended when tool is being used in tool holder.
Keep hands and fingers away from router bit when tool is switched on.
Air leaks around nose when tool is at rest Driver blade in up position.
Red LED and yellow LED both glow continuously when tool is turned ON.
Disconnect air hose when tool is not in use, and place in a safe area.
WARNING, Do not keep trigger depressed when tool is not in use.
Accordingly, generally speaking, when tool capacitance increases, the endpoint phase shift decreases.
Always remove the battery pack when tool is not in use.
In the later Mesolithic phase is when tool making became more abundant.
To use air duster, push red button on cap when tool is connected to air.
Always use lock-off when tool is not in immediate use.
Always wear suitable hearing protection when tool noise exceeds 80dB.
The tool driving mechanism may cycle when tool is connected to the air supply.
Always use appropriate hearing protection when tool noise exceeds 85dB.
Close Konsole when tool is finished.
Place tool on a level surface when tool is not hand held.
Extension cords for outdoor works - When tool is used outdoors, use only extension.
NOTE, Do not change gears when tool is running.
Yellow LED glows when tool is turned ON.
Always use proper hearing protection when tool noise exceeds 85dB.
You'll also be interested in:
Examples of using When
Show more
Louis did it for free when he fixed my tattoo
When you deposit tuppence in a bank account
Some people laugh when they are drunk
Examples of using Tool
Show more
The tool is intended for blowing debris
Have your power tool ser v iced by a
Tool operates erratically or appears to be losing power
