Examples of 'width of the slot' in a sentence
Meaning of "width of the slot"
width of the slot - This phrase references the horizontal measurement or dimension of an opening, gap, or receptacle that is narrow relative to its length. It commonly pertains to physical spaces like slots in machines or structures
How to use "width of the slot" in a sentence
Basic
Advanced
width of the slot
The width of the slot is an important parameter.
This enables coatings to be considerably thinner than the width of the slot.
The width of the slot may be varied as required.
The indicator has a diameter greater than the width of the slot.
A width of the slot is defined at each point along its length.
The fasteners thereafter expand within the channel to exceed the width of the slot.
A variable width of the slot can also be made with two curved walls.
Where λ is the wavelength of the laser beam ; a is the width of the slot.
The minimum width of the slot is substantially equal to the width of the electrodes.
These tiles give dimeznije only cover the breadth, without a width of the slot.
The width of the slot is normally greater than the diameter of the circular hole.
The polymerisation apparatus according to claim 5, wherein the width of the slot increases downstream.
The width of the slot 8 is therefore about 3mm.
Therefore it reduces the width of the slot 23.
Moreover, the width of the slot 18 is theoretically as small as possible.
See also
The thickness of the plate is less than the width of the slot 12.
In such an embodiment, the width of the slot 9 will be variable and not constant.
The width of the spots depends directly on the width of the slot ( 3 ).
The width of the slot 35 is smaller than the diameter of the wire.
A dispenser according to claim 1, wherein the width of the slot is not greater than 10mm.
The width of the slot 11 is approximately equal to half the length of the nozzle.
The diameter of the cavity 28 is larger than the transverse width of the slot 22.
The width of the slot 2 influences the quality of the picture of the object 3.
The web portion 24 has a height adapted to the normal width of the slot 10.
The width of the slot is greater than that of the diameter of the bolt 98.
The thickness of the sheets 1 and 2 correspond substantially to the width of the slot 10.
The width of the slot 34 is less than the width of the annular channel.
The screw 43 has a head whose diameter is greater than the width of the slot 44.
The width of the slot is therefore equal to the distance separating the plates 204.
Naturally the screw head 15 has a diameter greater than the width of the slot 13.
The width of the slot 38 is twice the thickness of the sheet metal, for example.
The joints 40 can have a larger, smaller or equal diameter to the width of the slot 62.
The width of the slot 38 thus is less than the width of the underlying channel.
Alternatively, the width of the slot 32 may vary irregularly.
The width of the slot 9 corresponds preferably to the width X 1 of the elongate holes 9.
In practice, the width of the slot 18 is preferably between approximately 1 and approximately 3 mm.
The width of the slot 30 depends on the thickness of the base 59.
The width of the slot 40 is greater than the diameter of the wire 20.
The width of the slot 14 corresponds substantially to the thickness of the tongue 12.
The width of the slot 74 is substantially less than the width of the slot 64.
The minimum width of the slot is determined by the space between the coils 1004.
The width of the slot 103 is designed to receive the two teeth 30 side by side.
The width of the slot 62 is slightly greater than the major diameter of the threads 51.
The width of the slot 23 is determined by the width W of the cut-out part 8b.
