Examples of 'width shall' in a sentence
Meaning of "width shall"
width shall: a formal requirement specifying the dimensions or size that something must be, often used in technical or legal contexts
How to use "width shall" in a sentence
Basic
Advanced
width shall
The swath width shall be provided in kilometres.
The selected tyre section width shall be.
The section width shall be calculated by the following formula.
The alignment tyre section width shall be.
The tolerances on width shall be as given in the following table.
Stricter national measures determining this width shall continue to apply.
The window width shall be eight open square meshes.
In case of fluorescent retro-reflecting material, the unvarying width shall be > 50 mm.
No other rim width shall be allowed.
Lot width shall be measured at the front yard building setback.
The tolerances on width shall be as follows.
Width shall be measured perpendicular to the major axis of the plate.
The nearest point of the swath width shall be provided in kilometres.
The width shall be measured perpendicular to the longitudinal axis of the sheet.
When filled, the ratio of height to width shall be not more than 2:1.
See also
The section width shall be obtained by means of the following formula.
With the development of the equipment, the max width shall be made 600mm.
Variations in width shall be gradual and not occur irregularly.
The width shall be measured at rightangles to the longitudinal axis of the product.
The tolerances on width shall be as given in table 3.
Their width shall be determined by their function as schoolpaths or through shopping areas etc.
The theoretical section width shall be calculated by the following formula,.
The width shall be measured perpendicular to the longi tudinal axis of the sheet.
In this case the width shall not exceed 10 meters.
The width shall be measured at right angles to the lon gitudinal axis of the product.
The maximum width shall be 10 meters.
This width shall be permitted to be not less than one-third the span length.
The pantograph gauge width shall be determined by the sum of the parameters defined below.
The rolled width shall however be at least ten times the thickness of the product.
This width shall be the horizontal distance between the mid-points of two imaginary vertical lines.
The maximum width shall not exceed 1/3 of the reflector width.
You'll also be interested in:
Examples of using Width
Show more
Set the width to suit your personal
Apply a border and select a border width
Overall width depends on the seat width
Examples of using Shall
Show more
The measured values shall be plotted on a graph
We shall hit them from all sides
Repayment of principal shall be made in equal instalments
