Examples of 'wing bolt' in a sentence
Meaning of "wing bolt"
a type of bolt that has small wings or projections on the head, allowing for easier tightening or loosening by hand without the need for tools
How to use "wing bolt" in a sentence
Basic
Advanced
wing bolt
Wing bolt for depth stop adjustment.
Loosen the wing bolt on the stopper.
Wing bolt for horizontal alignment of the.
Tighten the wing bolt again.
Wing bolt for adjustment of auxiliary handle.
Then tighten the wing bolt to secure the base.
Wing bolt for parallel fence.
Then tighten the wing bolt again in clockwise direction.
Wing bolt for parallel guide.
It is very hazardous to allow this wing bolt to remain loosened.
Turn the wing bolt and jack screw counterclockwise.
The hole and thighten the wing bolt securely.
Tighten the wing bolt at the desired height in the.
Of the hole and tighten the wing bolt securely.
Remove the wing bolt and the air cleaner cover.
See also
Affix the pedal rod to the damper with the wing bolt.
Loosen and remove the wing bolt from the handle.
Loosen wing bolt allowing the stopper pole to contact with stopper block.
Move the stopper to the desired position and tighten the wing bolt.
Then tighten the wing bolt to secure the side grip.
Adjust the depth gauge to the desired depth and tighten the wing bolt.
Unscrew the wing bolt to detach the tether from the jack.
Install the depth gauge on the tool with the wing bolt and washer.
Loosen the wing bolt on the depth guide and move the base down.
Screw together the centre pin and the rip fence with a wing bolt.
Turn the wing bolt anticlockwise and swivel the additional handle to the required position.
Fix the position of the pedal rod and the pedal temporarily with the wing bolt.
Loosen wing bolt D to adjust the depth stop.
Depth stop Open the wing bolt.
Screw the Wing Bolt in to secure the gas tank.
Install the straight guide on the guide holder with the wing bolt B.
Unscrew the Wing Bolt from right bracket of tank holder.
Install the trimmer guide on the tool base with the wing bolt B.
An additional Nut and Wing Bolt is secured AFTER inserting tank into tank hole.
Before any work, make sure that the wing bolt.
Retighten the wing bolt for the depth stop adjustment 6 again.
Store the damaged tire, using the wing bolt to hold it in place.
Depth, the wing bolt for adjusting the angle of inclination are securely clamped.
At the desired depth of cut, secure the base by tightening the wing bolt.
Thread the nylon wing bolt into position, securing the wing to the fuselage.
After adjusting the quide, fix it firmly in place by tightening the wing bolt.
To remove the side handle, loosen the wing bolt and rotate the handle.
Align the wing with the fuselage and secure it into position using 1 nylon wing bolt A.
Connect the leads, then use the wing bolt to secure the wing to the fuselage.
When adjusting the guide roller up or down, loosen the wing bolt C.
Tighten the 6mm wing bolt to secure the crown molding Stoppers.
After having completed the adjustment, reconfirm that the wing bolt are firmly tightened.
Loosen the wing bolt 22 on the dust extraction attachment.
After adjusting, tighten the wing bolt.
Loosen the wing bolt 33 and adapt the quickaction clamp to the workpiece.
