Examples of 'wing panels' in a sentence
Meaning of "wing panels"
Wing panels are the movable parts of an aircraft's wings, usually located towards the trailing edge, that can be extended or retracted to control the aircraft's flight
How to use "wing panels" in a sentence
Basic
Advanced
wing panels
Attach the wing panels to the fuselage.
Like the finished outer wing panels.
Secure the wing panels to the fuselage.
That make up each of the outer wing panels.
Scattered wing panels and other elements.
Make sure to install them in the correct wing panels.
With the outer wing panels attached.
The ailerons are supplied temporarily taped to the wing panels.
Fit the wing panels back to the fuselage.
The second aircraft had flapping outer wing panels.
The outer wing panels can be detached for transport or storage.
And are ready to bolt them to the outer wing panels.
Temporarily hold the wing panels together over the plan and.
You will need to open up the holes in the wing panels.
The wing panels can now be joined using the plastic joiner supplied.
See also
Check that the stabilizer is aligned equally with the wing panels.
The wing panels can be removed once the epoxy has fully cured.
The first step is to install the servos in the outboard wing panels.
Place the aileron servos in the wing panels as shown in the following photo.
This was cured by doubling the number of rivets in the outer wing panels.
The wing panels should not be joined until you have completed this check.
Secure both the left and right wing panels at this time.
Those on the wing panels are taken from texts referring directly to the two saints.
Engage the wing retainer system to hold the wing panels against the fuselage.
The upper and lower wing panels may then be assembled to form a wing box.
Model development required knowledge of the filling times at defined locations within the wing panels.
Press the wing panels together onto the fuselage until the wings click into place.
The Z fold consists of a center panel flanked by upper and lower wing panels.
The outer wing panels are slightly modified Ventus wings.
Joining the three wing panels Caution.
Constructed around a center-body flanked by a pair of outer wing panels.
Said wing panels may further comprise flaps, blades or the like.
A method for automated manufacture of aircraft wing panels comprising,.
The outer wing panels contained main and auxiliary, integral fuel tanks.
A system for automated manufacture of aircraft wing panels comprising,.
With both wing panels in position, make sure they fi t tightly against the fuselage.
It was evenly tapered with rounded tips and the outer wing panels had 5° of dihedral.
Completing the wing panels Glue the retract servo plate in the right-hand wing panel.
The side walls must pass through the fuselage, closing the load on the wing panels.
The illustration shows the two wing panels being slid together on the wing joiner 10.
Other plumages have a plainer orange-brown head, a browner back and chestnut nape and wing panels.
The rear fuselage, empennage, and outer wing panels remained identical with the sailplane version.
The Z-fold consists of a center panel flanked by upper and lower wing panels.
Plug the wing panels together using the joiner tube 45.
In the same fashion as the Henley, the Hotspur used standard Hurricane outer wing panels.
Plate 1 and Plate 2 sizes are representative of upper wing panels of an ultra-large capacity aircraft.
The wing panels are joined using UHU plus endfest 300 slow-setting epoxy.
Trial-fit the tips, and glue them to the wing panels using cyano.
The outer wing panels had 3 ° of dihedral.
O NMF Canada - world leader in processing large, machined wing panels.
You'll also be interested in:
Examples of using Panels
Show more
Support large panels to minimize the risk
Panels indicating the type of craft concerned
The lights on these panels operate as follows
Examples of using Wing
Show more
Tighten the wing nuts with pliers
Wing pads are present on the last instar
Unless they wing their way to thee
