Examples of 'wire diameter' in a sentence
Meaning of "wire diameter"
relates to the thickness or width of a wire, typically measured in millimeters or gauge. It represents the dimensions of the wire and is used to determine its electrical conductivity, strength, and suitability for specific purposes, such as in electrical circuits or structural applications
How to use "wire diameter" in a sentence
Basic
Advanced
wire diameter
A change in wire diameter results in changed parameters.
Total wave height excluding the wire diameter.
Contact tip and wire diameter not matched.
Wire gauge is a measurement of wire diameter.
Wire diameter of nominal dimension.
On request other bores and wire diameter are available.
The wire diameter max.
These losses decrease as the wire diameter increases.
The wire diameter diminishes with increasing gauge size.
These sizes are largely a function of the wire diameter.
Quick convertibility of the wire diameter with exchangeable rotors.
The wire diameter can also correlate to the wire material.
Nominal wire diameter.
The inner guide has a groove to match a particular wire diameter.
In much of the world wire diameter is often expressed in millimeters.
See also
The same is the case with respect to the wire diameter.
Area stranding and wire diameter overall diameter weight.
Wire diameter in mm.
Selvedge wire diameter.
No down time by changing the mesh geometry with unchanged wire diameter.
With increasing wire diameter increases the maximum operating temperature.
The depth of indentations in the wires is given as a percentage of the wire diameter.
At the same time a smaller wire diameter manages stronger curvation.
The clip may have any number of loops and wire diameter.
The angle B will vary based upon the wire diameter and belt pitch that is selected.
The depth of indentations in the wires is given as a per centage of the wire diameter.
Make sure the side stamped with the desired wire diameter is facing the Drive Assembly.
The tooling of known spring coiling machines is made to handle a specific wire diameter.
A wire diameter specification based on the American Standard.
For very large slow motors a larger wire diameter could be used.
Wire diameter selector switch r Wire Diameter.
The upsetting ratio is the head wire length divided by the wire diameter.
Loop diameter Wire diameter Document thickness.
The table below indicates which drive roller groove goes with each wire diameter size.
Wire Diameter and Hole size can change.
With each pass, the wire diameter decreases.
Class 3 grounding work must be conducted grounding wire diameter.
Accordingly, a wire diameter is selected for the solid stabilizer.
The minimum aluminium filler wire diameter will be 1 mm.
As the wire diameter increased to overcome these problems, spatter was substantially increased.
Diameter d, the nominal wire diameter in mm.
However, the wire diameter is preferably large to suppress formation of the supercooled microstructure.
In this case, the winding pitch is equal to the wire diameter.
Therefore, the intermediate wire diameter before final drawing is different in each process.
The free height is preferably at least 3 times the wire diameter.
The coolant / filter has a predetermined wire diameter and a predetermined bulk density.
In this case, the wire winding step is equal to the wire diameter.
Preferably, the wire diameter is smaller than the dimensions of the holes in the mesh.
Experiments have shown that a 4 mm square mesh with a wire diameter of around 1 mm works well.
Specification, Wire diameter is need indicated when customer place order.
You'll also be interested in:
Examples of using Diameter
Show more
A change in wire diameter results in changed parameters
Diameter of and pressure in the fire mains
The incoming hole diameter on auxiliary terminal
Examples of using Wire
Show more
Steel wire liners can be coated or noncoated
Use a passage aid wire or previous cord
Cut wire liner at the right length
