Examples of 'wire end' in a sentence
Meaning of "wire end"
Wire end typically refers to the tip or extremity of a wire. It can also refer to the end portion of a wire that is used for specific purposes, such as connecting electrical circuits or securing objects together
How to use "wire end" in a sentence
Basic
Advanced
wire end
Fixing a second wire end to an electrical component.
Available with a variety of wire end fixings.
Wrap loose wire end with electrical tape.
Repeat this procedure for the remaining wire end.
Make both wire end the same length.
Put one of the provided plot connectors on the second wire end.
Insert wire end into butt connector and crimp.
Do not push whisk in from the wire end as wires may be damaged.
Wrap the wire end with electrical tape to prevent accidental grounding.
Unconnected wire end points.
Wire end ferrules should be used when shortening the flexible connection cables.
The outwardly extending wire end is attached to the container.
The result is that drops are more easily removed from the wire end.
The other loop wire end is supported by the catheter.
The belt connector preferably comprises a cover enclosing the connector and wire end.
See also
The appropriate wire end sleeves must be attached to the wires.
Hold down handle, then insert wire end into hole.
Cut the wire end coming out from the current nozzle.
Each of the contacts extends from a wire end toward an assembly connection end.
Thread wire end with the connector through the hole on the end of a wire box.
This is commonly done by having a threaded wire end on the wooden tracker rods.
The platinum wire end of the prosthesis was then wrapped around the incus.
Another possibility is that the other loop wire end is attached to the catheter.
Release the wire end from the spool and cut off any deformed section.
The displacement distance of the loop wire end 3 will be twice that length.
The wire end must not have sharp edges when inserted into the wire liner.
Always adjust throttle wire end play before governor adjustment.
Figure 2 shows a partial plan view of the terminal for processing the shielding wire end.
Insert the exposed wire end into the lead terminal.
Strip wire end to this point b Excessive strip length may cause electrical shock or leakage.
Example, for r and r or r and r jumper, strip wire end long enough to join both terminals.
Wrap a wire end around another thumbtack and push that one into the wood as well.
Slide insulator body onto one wire end Figure 5.
In clockwise direction, the left wire end was crossed similarly over the corresponding right one.
Wire end cables, floor mats, industrial sheets.
Round crimp-style terminal Strip wire end to this point.
Strip wire end to this point 2 Excessive strip length may cause electrical shock or leakage.
Place a cap and a neoprene gasket sleeve on each wire end to be spliced see Figure 8.
Strip wire end to this point 2.
The black wire in REMOTE SCO 10 communication wire end must be connected to earth.
The wire end is retained in the locking unit 17.
Securely on the cable 's wire end.
Look the wire end in the side hole of the spool .!
Connect the positive lead ( red ) on the prepared wire end.
Wire end ferrules create first-class, solderless connections, ensuring precise, long-term operational reliability.
Measure ( if needed ) and then cut excess cable from bare wire end of cable.
Adjust the play of wire end on carburettor side to 1 - 2 mm.
The upper power lead can be produced as metal ( copper ) braided cord wire end.
After assembly, adjust the play of wire end on carburettor side to 1 - 2 mm.
Apply a new wire end sleeve of 1.5 mm ² on each cable end . special tool required.
You'll also be interested in:
Examples of using End
Show more
End poverty in all its forms everywhere
This could be the end of a beautiful friendship
End this before people get hurt
Examples of using Wire
Show more
Steel wire liners can be coated or noncoated
Use a passage aid wire or previous cord
Cut wire liner at the right length
