Examples of 'wire is connected' in a sentence
Meaning of "wire is connected"
wire is connected"} , {"a": "When someone says 'wire is connected,' it typically means that an electrical or communication wire has been physically joined or attached to another component, enabling the flow of electricity or transmission of signals. It is often used in discussions related to electrical installations or troubleshooting connectivity issues.
How to use "wire is connected" in a sentence
Basic
Advanced
wire is connected
Spark plug wire is connected to spark plug.
Make sure the spark plug wire is connected.
The blue wire is connected to negative of battery.
Check that the earth wire is connected.
Each wire is connected to two pads.
Ensure the spark plug is installed and wire is connected.
Ensure grill probe wire is connected correctly to control.
A wire is connected in the same way as already described above.
Make sure the wire is connected to.
The wire is connected to a sensitive galvanometer.
It does not matter which wire is connected to which terminal.
This wire is connected to the chassis for safety reasons.
The other end of each wire is connected to the pacemaker.
The switch will not work unless the ground wire is connected.
Make sure the wire is connected to electrode assembly.
See also
The game ends when every terminal and every wire is connected to the server.
Ensure wire is connected from control valve to timer box.
An electrically responsive actuator wire is connected to the lock member.
The smaller wire is connected to the high water level sensor.
The point where the remote controller wire is connected differs depending.
This ground wire is connected to the ground post on the energizer.
Inside the designated area and the perimeter wire is connected in the right polarity.
The wire is connected.
Please check and make sure the AC power ground wire is connected.
Ensure that the wire is connected to the electrode assembly.
An earthing fault arises when the A wire or B wire is connected to earth.
Make sure black wire is connected between the igniter and electrode.
Green light flashing, check if the boundary wire is connected correctly.
My wire is connected to it.
It is important that each wire is connected to the right place.
Said wire is connected between the antenna element and a first end of said feeder conductor.
Ensure that the earth wire is connected to the interface.
Before turn on the power, make sure the ground wire is connected.
Check that the spark plug wire is connected to the spark plug.
This wire is connected to the outer PA terminal.
Make sure the spark plug wire is connected to the spark plug.
Use an extension cable or cable drum with a three-core cable whose earth wire is connected.
Make sure safety switch wire is connected to engine and properly grounded.
Note, Microphone on headset does not work when the wire is connected.
The perimeter wire is connected to the plot connector in the wrong polarity.
A lead line 46 such as the electric wire is connected to the upper plate.
Ze wire is connected.
Make sure that the transducer shield wire is connected at the electronics end only.
This electric wire is connected to a changeover switch ( not shown ) which is connected and disconnected.
The other end of the electric wire is connected to the power supply.
My wire is connected to it . You would blow the whole thing.
Always check that the ground wire is connected before starting engine.
A signal wire is connected internally to a movable wiper ( C ) that sweeps across a high resistance filament band.
Via its front end face each wire is connected to the adjacent wire.
My wire is connected to it. you'd blow the whole thing.
You'll also be interested in:
Examples of using Connected
Show more
You are directly connected to three different murders
Connected switch is offline or not operating properly
The audio cable is connected to the headset
Examples of using Wire
Show more
Steel wire liners can be coated or noncoated
Use a passage aid wire or previous cord
Cut wire liner at the right length
