Examples of 'wire must' in a sentence
Meaning of "wire must"
This phrase suggests a requirement or necessity for a wire, which typically refers to a thin, flexible metal thread, to be present or utilized in a certain situation. It implies that the wire is essential or mandatory for a particular purpose or functionality
How to use "wire must" in a sentence
Basic
Advanced
wire must
Normal electric wire must never be used.
The wire must have slipped he thought.
A separate ground wire must be utilized.
This wire must remain grounded to the oven.
In this case the brown wire must be insulated.
Every wire must be connected rmly.
For a stern thruster that purple wire must be cut.
The ground wire must be attached first.
For a bow thruster that purple wire must be a loop.
The red wire must be connected by car.
An additional fourth wire must be.
Every wire must be connected firmly.
The battery wire and the ground wire must be same size.
Frayed wire must have ignited the insulation.
During the cold drawing operation the wire must be periodically annealed.
See also
Every wire must be securely connected.
To perform as a heating element the tape or wire must resist the flow of electricity.
A wire must have come loose.
A fourth aspect is that the twisted wire must have a tension which is within acceptable limits.
The wire must be severed to provide electrical supervision of the connection.
Type of pigtail and gauge of wire must conform to local codes and instructions.
The wire must have slipped on the great hill of his back.
Any bare Earth wire must be.
Electrical wire must be stripped and not incinerated.
In this case the blue / grey wire must be insulated.
The wire must be down or something.
For this purpose, the wire must be flexible.
Power wire must be fused near the battery.
The reel of wire is too taut, the wire must come.
The end of the wire must be turned backwards.
With regard to such esophageal stricture guide wires, the wire must be relatively stiff.
Connecting wire must be provided on site.
The water / air interface at the suspension wire must be well defined.
Trip wire must be a pressure plate.
For the system to function, the wire must form a continuous loop.
The wire must have reacted to this tower.
For manual transmission vehicles, the blue wire must be connected to the ignition switched plus.
That wire must have frayed or come loose.
To avoid potential problems during wire inching, the wire must be bent before the insertion.
The wire must have slipped.
It was working earlier . The wire must be down or something.
This wire must be longer than the other wires.
Any kind of connection, the safety wire must be connected to the PE terminal.
Trip wire must have been hidden in the strap.
Second, Their quarters will be enclosed with barbed wire . This barbed wire must be electrified.
The loose black wire must be connected to ground.
Wire must be fixed by ACT, becoming right angle.
This barbed wire must be electrified.
Wire must be rated at 30 Volt minimum.
For it to do so the wire must be stretched like an elastic.
